Look Who it Was Random video

FPV Flying: A few minutes of raw footage. Micro chasing a 5"

984 views · Published 25 September 2017 · 2:36 · Indexed 12 November 2026

Channel: CurryKitten · 2017 · People & Blogs

Watch on YouTube

I tried chasing a 5" in my Aurora 100 in it's original incantation, but the camera wasn't up to the job.  Now the RunCam Micro Swift is in there though, I can actually see and so had a good time getting a bit of a chase on.

Lots of gusty wind + bent props didn't always make for the smoothest flight, but a fun one nevertheless.  Quads and planes are a bit different in chase flights in that often a quad is easier to spot against the blue sky, but not against grass, and with planes it's the opposite.  Sometimes he's hard to spot, but you get the hang of what to look for.

If you want to look at the RunCam install in more detail, check the previous video here https://youtu.be/QR_FHdiBqJs and the blog post here http://www.currykitten.co.uk/adding-the-runcam-micro-swift-camera-to-a-micro-quad/

The things used in this build were (affiliate links)

RunCam Swift Micro - https://www.banggood.com/RunCam-Micro-Swift-600TVL-2_1mm-2_3mm-IR-Blocked-CCD-FPV-Camera-PAL-NTSC-5_6g-p-1144546.html?p=E81211714085201408XQ

VTX03 - https://www.banggood.com/Eachine-VTX03-Super-Mini-5_8G-72CH-025mW50mw200mW-Switchable-FPV-Transmitter-p-1114206.html?p=E81211714085201408XQ

Aurora 100 - https://www.banggood.com/Eachine-Aurora100-100mm-Mini-Brushless-FPV-Racer-BNF-w-F3-OSD-10A-Dshot600-5_8G-25MW-48CH-VTX-p-1127606.html?p=E81211714085201408XQ

Firer 110 Frame - https://www.banggood.com/Eachine-Firer-110-110MM-Micro-Brushless-FPV-Multirotor-Racing-Frame-19_5g-3K-Carbon-Fiber-p-1131317.html?p=E81211714085201408XQ

Gemfan 20-35 Props - https://www.banggood.com/10-Pairs-Gemfan-2035-2X3_5X4-4-Blade-1_5mm-Mounting-Hole-CW-CCW-FPV-Racing-Propeller-Blue-p-1188847.html?p=E81211714085201408XQ

Track: LFZ - Popsicle [NCS Release]
Music provided by NoCopyrightSounds.
Free Download / Stream: http://ncs.io/PopsicleYO

If you liked this video and want to show your support - either through subscribing, using an affiliate link, becoming a Patreon supporter or buying a T-shirt, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me/

I'm maintaining a coupons/deals page on my blog, so if you are about to buy something, check it out in case there's a coupon you can use !
http://www.currykitten.co.uk/coupons-deals/

More from this channel