2012 Nissan Murano CrossCabriolet - NISSAN Intelligent Key and Locking Functions

3,483 views · Published 20 April 2015 · 5:17 · Indexed 1 November 2026

Channel: Nissan Owner Channel · 2015 · Autos & Vehicles

Watch on YouTube

NISSAN Intelligent Key® and Locking Functions

With the NISSAN Intelligent Key® in your pocket or purse, you can lock or unlock the doors, as well as start the engine. To unlock the vehicle, push this Request Switch on the door handle. That door will unlock. Push the switch again within one minute to unlock all doors. To lock your vehicle, push any door handle's Request Switch once, after all doors have been closed.

You can also open your trunk using the Opener Request Switch. While carrying the Intelligent Key with you, push the Opener Request switch under this trim panel to open the trunk. These lock and unlock functions are operational when the Intelligent Key is within about two and a half feet of the corresponding request switch. The trunk can also be opened remotely by pressing this button on the Intelligent Key for more than one second.

The Intelligent Key is also equipped with a remote system for operating door locks and windows. It is possible to lock and unlock all doors and open windows using your Intelligent Key from outside the vehicle, at a distance of up to 33 feet. To lock the vehicle, press the LOCK button. Your hazard warning lights will flash twice, your horn will beep once and you'll know that your vehicle is locked. To unlock the doors, press the UNLOCK button. The hazard warning lights will flash and the driver's door will unlock.  Press again within one minute to unlock all doors. If so equipped, holding the UNLOCK button for more than three seconds after the doors are unlocked, will lower the automatic windows. When the UNLOCK button on the Intelligent Key is pressed, all doors will automatically relock within one minute unless any door is opened, or you push the ignition switch.

If you are near your vehicle and feel threatened, press this PANIC ALARM button for more than one second. The panic alarm will sound and the headlights will flash for 25 seconds. To turn OFF the panic alarm, press any button on the Intelligent Key. Please Note: If using the PANIC ALARM button to turn OFF the alarm, the button must be pressed for more than one second.

When you have to leave a key with a parking valet, you can remove the Mechanical Key, which is concealed inside your Intelligent Key and keep it with you to protect your belongings. To remove the Mechanical Key, release the LOCK knob on the back of your Intelligent Key and pull the key out. Next, use your Mechanical Key to lock the glove box. Then give the Intelligent Key to the valet and keep the Mechanical Key with you. Your belongings in the glove box will now be secure while you are away from the vehicle.

You may also use your Mechanical Key to lock or unlock the driver's door or all doors from outside the vehicle. To lock all doors, turn the key toward the rear of the vehicle. Turn the key toward the front of the vehicle one time to unlock the driver's door. To unlock all doors, turn the key to the NEUTRAL position, then turn toward the front again within five seconds. If so equipped, turning the driver's door key towards the front of the vehicle for more than one second will lower the automatic windows. To close the windows, turn the driver's door key toward the rear of the vehicle for longer than one second. Release the key to stop the windows at any point during opening and closing.

You can lock and unlock all doors by pushing one of the POWER DOOR LOCK switches, located on the driver's and front passenger's doors. When locking doors this way, be certain not to leave the key inside the vehicle. You can also lock and unlock a door using the INSIDE LOCK KNOB, found on the inside of each door. Please Note - If you attempt to lock your vehicle with a POWER DOOR LOCK switch while the Intelligent Key is in the port and any door is open, all doors will lock, then automatically unlock.

In the event your Intelligent Key battery is low, there is a backup method to start the engine. A low battery will cause a guide light on the Intelligent Key port to blink. In this situation, inserting the Intelligent Key into the port will allow you to start the engine.  Be sure the front side faces up and the key ring end faces towards you. Then follow the normal start procedures. To remove the Intelligent Key from the port you must first push the ignition switch to the OFF position.

Your Intelligent Key can also be used to adjust the hazard indicator and horn beep features. Please refer to your Owner's Manual for complete information on adjusting these features.

To prevent accidentally locking your key inside the vehicle, your Intelligent Key has lockout protection. If you exit the vehicle with the Intelligent Key still inside, it will unlock all doors immediately and sound a warning chime as soon as you close the door.

The Intelligent Key contains sensitive electrical components. Please avoid these circumstances that could affect its operation.

More from this channel