2019 Vauxhall Corsa GSi - Drive, Exterior, Interior

1,509 views · Published 21 September 2018 · 5:00 · Indexed 10 November 2026

Channel: Motorward · 2018 · Autos & Vehicles

Watch on YouTube

http://www.Motorward.com - Subscribe For More Cool Videos: https://goo.gl/2nkv2Z

The new Corsa GSi is powered by a 1.4-litre turbocharged engine with double overhead camshafts and a 16-valve cylinder head. The unit produces 150PS at 5,000rpm and 220Nm of torque. Acceleration from 0-60mph takes just 8.4 seconds, with strong performance right through to its top speed of 129mph. Maximum torque is produced between 2,750 to 4,500rpm, and mated to a short-ratio six-speed gearbox, helps the GSi accelerate from 50-70mph in fifth gear in just 9.9 seconds.

While the standard outputs of Vauxhall’s 1.4 Turbo engine remain unchanged, for the GSi, boost pressure, fuel injection and timing have been subtly re-calibrated to allow the unit to breathe more freely, especially at higher revs. This allows more power to be maintained in the upper reaches of its performance.

In addition to delivering high performance, the Corsa GSi is also part of Vauxhall’s latest Euro 6d-TEMP rollout (fuel economy 47.1mpg combined, CO2 emissions from 138g/km).

CHASSIS

    Based around 210PS Corsa VXR’s underpinnings
    Key highlight: Koni Frequency Selective Damping

The Corsa GSi’s chassis offers all the grip and poise that you’d expect from a set-up that previously underpinned the 210PS Corsa VXR.

Based on the less extreme, standard VXR chassis, the Corsa GSi’s 150PS of power is delivered to the front wheels via an open differential, but provides high levels of mechanical grip, combined with exceptional control at higher speeds.

Like the VXR, the GSi uses Koni’s Frequency Selective Damping (FSD) technology, which provides acceptable comfort for everyday use, but increased damping characteristics for more enthusiastic driving.

Compared with a conventional damper, which works by oil passing through a piston assembly, FSD adds a valve which controls a parallel flow of oil next to the piston. This secondary oil flow can therefore be closed off, giving a rise in damper force when conditions demand it.

Put simply, FSD is a hydraulic amplifier which can delay the build-up of pressure if required, achieving the best possible combination of handling and comfort, without the complexity and expense of a regular adaptive damper.

More from this channel