Operating Mallet in reverse with Kadee body mounts

597 views · Published 15 June 2015 · 16:18 · Indexed 19 October 2026

Channel: gregeusa · 2015 · Entertainment

Watch on YouTube

This video is about my (Ted Doskaris) Aristo-Craft Mallet Loco with Vanderbilt tender having been fitted with Kadee centerset couplers running in reverse on my outdoor layout as a test of strength.  The test train is first shown with 9 passenger cars pulling the worst part of the double loop grade, and then later in the video it has 7 cars but operation in the reverse direction on the upper part of the layout.
Note:  The video has sections that don't show train operation as intended due to the camcorder display washing out so I could not see what was happening.  If this is disturbing to you, DON'T WATCH THE VIDEO.  
As to detail about the loco itself, the front pilot is fitted with a Kadee 907 centerset coupler in a modified Kadee box.  The front pilot had to be reinforced with a thin steel "U" bracket (strap) attached over the coupler post, sandwiched with the mounted box, at one end and the front motor block at the other end to ensure optimum strength so the pilot would not pull off under load since the pilot is only held in place by two small screws.  The strap is an inverted "U" shape (with offset horizontal mounting ears) so when the front pony truck pivots on curve tracks it will clear within the "U" opening.

More from this channel