3D Printer Electronics Wiring Matters
1,958 views · Published 16 June 2018 · 33:23 · Indexed 20 November 2026
Channel: theBreadboard · 2018 · Science & Technology
In this video I will show you why the gauge (Thickness of the copper) of your wire, mainly for the heat bed matters a great deal For Safety, Prevent Fires and improve the power actually available to the heat bed I use a thermal Camera (FLIR AX8) and simple measurements to get the point across I use my upgraded Tronxy X5s as the example, here i took it from 12V to 19V then to 24V, capturing all the images for thermals along the way, Heat Bed temps and Heat Bed wiring. If your not convinced after this then I dont know what will. If your running more than about 10A through to your heat bed, you need better than 16AWG wire. Also this kind of explains why so many 3D printers come with an inadequate power supply. A good 480W or greater 24V power supply is expensive, nearly 1/2 the cost of the printer on its own. This video was made possible with the help from RS-Components Equipment used in the video Flir AX8 :- https://uk.rs-online.com/web/p/ir-infrared-temperature-sensors/8938489/ RS Pro Infrared Temperature Sensor :- https://uk.rs-online.com/web/p/infrared-sensors/1618103/ Power Supply, 480W, 24V dc https://uk.rs-online.com/web/p/din-rail-panel-mount-power-supplies/0282574/ TronXY X5S https://goo.gl/P3kHiq
More from this channel
-
2:18
Agilent U1272A vs U1273A Sunshine test
-
3:41
Agilent U1272A vs U1273A Indoor test
-
5:43
33622A #2 Review: PrepowerUp
-
11:57
Measuring Components with a squarewave, Pt 3 - The Math
-
6:03
RPI B+ and the EnOcean Sensor Kit Overview of Up Comming Blogs and Videos
-
3:36
TDR #5 RG6 Maths
-
11:37
TDR #6 UTP Measurement
-
9:58
Resistance Standard