Look Who it Was Random video

syringe labeling equipment pharmaceutical labeler Medical packaging machinery máquina de etiquetado

390 views · Published 10 December 2013 · 2:43 · Indexed 18 October 2026

Channel: Jack Du · 2013 · Entertainment

Watch on YouTube

syringe labeling equipment pharmaceutical labeler Medical packaging machinery máquina de etiquetado designed and manufactured by our engineer team in cosmetic&food&pharma making and packaging machinery is widely used in the daily chemical industry such as syringe labeling equipment pharmaceutical labeler Medical packaging machinery máquina de etiquetado.We as a famous manufacturer moreover can design and produce the packaging machine according to the special requirements from customers.
One. Labeling position unstable
1 , Pressure tape devices might not be tightly, resulting in marked with loose, electric eye test inaccurate. Pressing labels address. 
2 , Might have the body slipping or it is not tightly, resulting in smooth away the bottom paper. Clamping traction body, too tight will pull crooked labels, to properly pull the bottom paper is preferred. (Usually if you pull out wrinkles in the paper by the end of time, when it should be pressed too tight)
3 , Posted mixed objects vary in shape or position to. Control of product quality. 
4 , Labeled objects should be placed parallel to the label label direction (note whether the products in the labeling process, can support bar to the left of the appropriate right of raising a point)
5 , Is attached to the object in the labeling station rotation should be guaranteed smooth (note you cannot touch strip panels), when the light objects, my benchmark should be put down, squeeze the labeled objects
6, Under the twin State, a single label ( 1 ) Leaflet, after keep spinning the workpiece, because there was no set the second delay of the label, the machine is waiting for the second label labeling signal status. (2) leaflets, after workpiece stop. Signal interference is because mark electric eye (reset electric eye) or an exception is delay control (click to move twice 2 Hou, then click move twice 1 can)
II. Take away
1 , Pressure belt devices too tight, causing marked away , Pressure reduction. 
2 , An automatic operation is marked with without deviation, rectifies a again. 
III. Labeling quality is not good, there are bubbles or creasing 
1 His incomplete, can reduce the speed of labeling. 
2 May be transparent labels, or labels too soft. 
3 , Standard gravity of his improper adjustments, his important adjustment efforts. 
4. in the beginning of the label folds, too soft may be the label, the label out of the bends at the time, lift the Strip panels as close as possible to the location of the product. 
5. before and after the label alignment, adjust the slant of a support bar and label of the product out of the vertical direction . By 1, and3 the two screws adjust the support bar 2 tail junction of the inclination to correct label errors

product labeling towards another direction in the process of moving, slightly lift the support Rod bearing block on the left . 

IV. Equipment has no reaction
1 , Confirm that the power lines, no problem. 
2 , Make sure the transmission fuse next to the outlet is good, such as burnt out, replace the
3 May loose internal wiring of electrical box, professional repair
The five. Label paper at the end of the regular fracture
1 , Pressure belt devices too tight, causing marked away , Pressure reduction. 
2 ， Label paper at the end of poor quality, or teeth too deep. This conformity label needs to be replaced. 
3 Send speed too fast, slow. 
4 , Watch the labels have been scratched in the moving process
VI. Continuous labels, stopped runaway
1 , Mostly test electric eye did not set well , resetting the electric eye can fix. 
2 , Electric eye does not apply the test labels, need to replace electric eyes can be applied. 
3 , Electric eye damage, need to replace the electric eye. 
4. step on foot switch multiple times to complete a label, due to induction electric eye of the label signal interference, resetting the electric eye
5. Confirm label from electric eye sensor slot inside through
Our Factory since 1992 has been manufacturing the cosmetic&food making and packaging machinery.In these field we have the experience rich enough to solve the questions encountered by our customers from both home and abroad.For more information about various high quality machinery like syringe labeling equipment pharmaceutical labeler Medical packaging machinery máquina de etiquetado,please email via [email protected] or browse our website http://penglaichina.com.
Follow us on twitter:http://www.twitter.com/jackdu007
Like us on facebook:http://www.facebook.com/jackdu999
Skype us by :turnanewleaf
Call us via:0086-15811882441

More from this channel