Autoplay Next video from Max length

#118-C How To Do It, make R-8 Tap Driver Q/Change Tool SPI Niken Milling Machine Holder Harley

1,901 views · Published 13 December 2014 · 3:28 · Indexed 4 November 2026

Channel: Tatro Machine · 2014 · Autos & Vehicles

20140619211334 1
#118-C How To Do It, make R-8 Tap Driver Q/Change Tool  SPI Niken Milling Machine Holder Harley

just one more special tool I needed to make to fix Harleys.
this is a milling machine tap driver tool. it is use to power tap threaded holes instead of holding the tap with a drill chuck or by hand tapping.
the holder is a SPI quick disconnect holder for SPI or Niken quick disconnect tap holders.
the tap holders also have a clutch in them so that you don't have to worry about breaking the tap off. you just reverse it and unscrew the tap. the main holder also has a floating action so you don't have to match the travel of the threads as the tap goes into the hole. you just have to keep it within a 1/4" or so of the distance.
a very nice setup if you have the room to use it.
yes these are very expensive tools, even the used ones I purchased.
you get what you pay for.
tatro

#118-C How To Do It, make R-8 Tap Driver Q/Change Tool SPI Niken Milling Machine Holder Harley

More from this channel