How to Build a Paintcrete Rabbit Hutch Part 1

698 views · Published 11 March 2018 · 5:37 · Indexed 21 October 2026

Channel: Tennessee Gun · 2018 · Howto & Style

Watch on YouTube

https://www.tngun.com/how-to-build-a-paintcrete-rabbit-hutch/
http://amzn.to/2DhndFC
With the outhouse roof coming out well, I decided to jump into a larger paintcrete project.  I have wanted to get back into rabbit breeding, and have planned a paintcrete rabbit hutch for a few years, I just never go the gumption to actually do it.

This project is a little different than my outhouse.  I am using better paint, less mortar mix, and sheets instead of window screen.

I alreadyt had the nails and the mortar mix, but the wood and paint cost me $53.00 at Lowes.  The sheets were a few dollars at the good will, so this is a rather inexpensive project.

The biggest problem is my choice of wood.  I used cheaper 2x3 lumber instead of 2z4 lumber, which caused a lot of splitting during nailing.

I have a lot of side to side movement, so I will need to buy more wood next paycheck.

I was more consistent with my mix, and I made a much more liquid mix than I did with the outhouse.

I used a 24 ounce water bottle with the top cut off to measure the liquid and a large container of cottage cheese to measure the mortar.  I used two scoops of mortar to a bottle of paint and a bottle of water.  After fixing very well, I found I could easily paint this mix on the sheets.

It went on pretty easy, and when I was done, the inside of the sheet was very smoothly coated with the paintcrete mix.  I actually found the inside rather attractive and finished looking - especially compared to the rough outer texture.

More from this channel