2014 Nissan Murano - Blind Spot Warning (BSW) (if so equipped)
3,548 views · Published 19 April 2015 · 1:24 · Indexed 22 October 2026
Channel: Nissan Owner Channel · 2015 · Autos & Vehicles
The Blind Spot Warning (BSW) System will operate when the vehicle is driven at speeds of approximately 20 miles per hour or more and uses the rear camera to detect vehicles in adjacent lanes on either side of your vehicle. The system helps alert the driver when a vehicle is identified in the detection zone. The system is automatically activated when the vehicle is turned ON as long as it has not been deactivated using the "Settings" menu in the Vehicle Information Display. The indicator light will illuminate when another vehicle is detected in the detection zone. If you activate a turn signal in the direction of the detected vehicle, a chime sounds twice and the indicator light will flash. The indicator light will continue to flash until the detected vehicle leaves the detection zone. There may be instances when you want to turn the BSW system OFF. You can turn the system OFF temporarily, by pushing the WARNING SYSTEMS switch on the lower left side of the instrument panel and its indicator light will turn OFF. To toggle the system on or off: • Press the SETTING button on the control panel, • Touch DRIVER ASSISTANCE, then • Touch BLIND SPOT WARNING. Please see your Owner's Manual for important safety information, system limitations and additional operating information.
More from this channel
-
0:35
2015 NISSAN Juke - Shoulder Belt Height Adjustment
-
1:43
2015 NISSAN Murano - Connecting Procedure without Navigation (if so equipped)
-
0:18
2012 NISSAN Rogue - Tilt Steering Column
-
0:45
2015 NISSAN Murano - Parking Brake and Indicator
-
1:04
2015 Nissan Quest - USB/iPod® Interface
-
0:36
2015 Nissan Quest - Instrument Brightness Control
-
0:40
2015 NISSAN Murano - Turn Signals
-
1:33
2015 Nissan Quest - Push Button Ignition