LED bulbs for the buses

887 views · Published 21 February 2016 · 3:00 · Indexed 26 October 2026

Channel: txstreetman · 2016 · Autos & Vehicles

Watch on YouTube

These are the bulbs I am using for the Blue Bird and some that I have used in the Thomas.  See below for cost and recommended uses.  Make sure to use the exact row LED height bulbs, or glass lensed bulbs shown, or the lamp lens will not fit.

Bulbs: 
Clearance lamps:
5050 red/amber BA15s (68/1156 socket) one row LED height: 
Cost ~$1 each, works only in Weldon 5050 triangle lamps (or equivalent), could be used where an 1156 bulb is used
***UPDATE*** These 5050 bulbs are too dim for the Weldon 5050 lamp.  Substitute with a 5630 LED

5630 red (or amber) T10 socket one row LED height (could also substitute the 5050 LEDs on this bulb)
Cost ~$1 each - good for Weldon 5050 triangle or Weldon 5000 rectangle (or their equivalents)

Brake/Tail Lamps:
CREE BA15S (1156) or BA15D (1157) Red/Amber with glass lens:
Cost: ~$18-$25/pair - Good for Weldon 1010 brake/tail/turn or the equivalent Baader Brown/KD lamps, could be used in small brake/tail lamps above license plates if separate license plate lamp is used.

More from this channel