Portabee Printing Companion Cube

2,483 views · Published 6 July 2013 · 3:00 · Indexed 27 October 2026

Channel: cygig · 2013 · Science & Technology

Watch on YouTube

Update: Read the full Portabee review and ask questions here: http://forums.vr-zone.com/chit-chatting/2904838-review-portabee-3d-printer-the-most-afforable-singapore.html

In this video, Portabee prints a simple and rough Companion Cube from Portal. It seeks to answer some of the questions my friends have been bugging me about 3D printer. The original print time is around 21 minutes and sped up and cut in this demostration video. The Companion Cube is around 25mm on each side, printed at 0.3mm resolution using PLA with 20% infill.

0:00 - Clearing the nozzle before printing by extruding 20mm of filament.
0:06 - Printing started, the extruder moves left and right (X axis) on a support that moves up and down (Z axis) and the print bed moves front and back (Y axis).
0:10 - Printing of a skirt to visualise the print area and prime the nozzle.
0:15 - Printing the base of the object.
0:57 - Printing the diamond shaped infill pattern.
1:28 - Printing the side of the cube which the top is larger than the bottom.
2:03 - Bridging the infill pattern gap to form a solid top.
2:37 - Print ending.
2:42 - Removing the print object from print bed using a knife
2:51 - Inspecting the printed object.

More from this channel