Semi Automatic Plastic Laminated Tube Filling & Ultrasonic Sealing MC أنبوب ملء آلة شبه التلقائي

2,046 views · Published 10 August 2016 · 2:39 · Indexed 19 October 2026

Channel: Jack Du · 2016 · Howto & Style

Watch on YouTube

Model YX-UF100B Semi Automatic Plastic Laminated Tube Filling & Ultrasonic Sealing Machines أنبوب ملء آلة شبه التلقائي designed and manufactured by our engineer team in cosmetic&food&pharma making and packaging machinery is widely used in the daily chemical industry like semi automatic filler equipment and such like.We as a famous manufacturer moreover can design and produce the packaging machine according to the special requirements from customers.
Plastic composite hose filling and sealing machine made of stainless steel, using the buttons to control the work process: artificial tubes, automatic rotary,quantitative filling, automatically cut off, heating sealing, cut tail, finished exit.
Basic parameter of Model YX-UF100B Semi Automatic Plastic Laminated Tube Filling & Ultrasonic Sealing Machines أنبوب ملء آلة شبه التلقائي :
model YX-UF100B
Compressed air Pressure: 0.4-0.6MPA Consumption: 0.3M3/MIN
Scope of work:Filling volume:A Type 5-15ML B type :10-75ML C-type :20-150ML D-type :50-300ML E-type:100-500ML F type :200-1000ML
Production capacity 20-30 times / min
Filling accuracy error less than 2%
Table adjustable height 100MM
Tank Capacity 20L, 30L, 40L, 50L
Filling the container diameter according to the material viscosity and filling volume set
All work using the full cylinder stroke control, easy to adjust filling volume, the filling speed can be adjusted.
It applies to all kinds of plastics and composite hose filling, sealing, date printing, cut tail. Sealing neat appearance, sealing strong, high accuracy, good stability.
The Model YX-UF100B ultrasonic tube sealer is designed to be mounted onto virtually all styles of filling machines. As the tube is advanced to the ultrasonic tube sealing station,
a switch closes to initiate the weld cycle. Air is directed into cylinders to advance the weld anvil and ultrasonic horn towards the center line of the tube.
The tube is closed to a preset gap and held for the applica-tion of sonic energy.
An ultrasonic power supply takes the 50/60 Hz electrical energy and converts it to 30,000 cycles per second thorough a power oscillator.
This high frequency electrical energy is applied to the convertor which transforms the electrical current to high frequency mechanical vibrations.
The sonic energy causes the horn to vibrate against the tube end at 30,000 cycles per second.
The intense vibration disperses any contamination from the seal area and generates heat to bond the material.
The energy is then stopped and the tube is held closed for a brief time (typically .05 to .150 seconds).
Then the tube goes to the next station on the filling line. Typically cycle times range from 45 to 80 units per minute, depending on tube diameter and material.
Our Factory since 1992 has been manufacturing the cosmetic&food making and packaging machinery.In these field we have the experience rich enough to solve the questions encountered by our customers from both home and abroad.For more information about various high quality machinery like Model YX-UF100B Semi Automatic Plastic Laminated Tube Filling & Ultrasonic Sealing Machines أنبوب ملء آلة شبه التلقائي,please email via [email protected] or browse our website http://penglaichina.com.
Watch us on Youtube:http://youtube.com/user/penglaichina
Follow us on News Center:http://www.penglaichina.com/news/
Skype us by :turnanewleaf
Call us via:0086-15811882441
Whatsapp:0086-15811882441

More from this channel