Wink Hub Nand Glitch
4,218 views · Published 19 April 2015 · 1:53 · Indexed 21 October 2026
Channel: The Exploiteers · 2015 · Science & Technology
NAND "Glitch" POC Instructions ########## The idea behind this attack is that we short out the data pins on the NAND while the kernel is being read from the NAND flash by the bootloader, this causes U-Boot to drop into a interactive shell over UART since a valid kernel can not be read. 1.) Take apart Wink hub. 2.) Attach USB to TTL adapter to UART pins. 3.) Power On Wink Hub 4.) After U-Boot starts, as the kernel begins loading, hold a wire and run it from GND to the NAND I/O 0 pin (#29). The kernel image will fail to load, dropping the user back to a U-Boot shell. 5.) The bootloader will default to an unsecure configuration. From here, you can alter kernel arguments, and set init=/bin/sh , booting to a root shell. This can be seen in the video below. More Info At: http://Exploitee.rs Follow us at: @Exploiteers
More from this channel
-
0:40
GoogleTV Rooted
-
4:00
Exploitee.rs DEF CON 21 Exploit Demo
-
47:32
Google TV Or: How I Learned to Stop Worrying and Exploit Secure Boot
-
1:18
Executing Root Commands On PogoPlug Mobile Through Web Interface
-
2:54
Hijacking Init and Access SSHD Server on GreenWave Reality TCP Connected Hub
-
3:35
Connected Data File Transporter Init Hijack For Root
-
0:55
Epson Artisan 700/800 UART Root Shell
-
1:32
Ultimate Doom Ported to Roku 2