How to make a Swamp wood flickering LED table light DIY
902 views · Published 8 June 2017 · 2:55 · Indexed 1 November 2026
Channel: Food for Dude · 2017 · People & Blogs
Materials & tools: piece of swampwood piece of beech piece of leather 3 orange flickering LED power adapter mini switch resistor dc socket shrinking tube wire screw solder cardboard pencil scissor jigsaw sandpaper clear epoxy resin tape 4mm, 5mm, 10mm drill forstner drill wood wax 2 components filler glue lighter Mark the stand from the swampwood on cardboard and mark a again with a little space. Cut the cardboard and mark the baseplate on a piece of beech. Remove the edge from card cardboeard and mark the base again. Saw the baseplate out. Round the edges of the top to the mark. Coat the swampwood twice with clear epoxy resin. Cover the base with tape and mark the stand. Mark where you want to have the lightning. Drill 4mm holes for the LED. Mark the place for the electronics and drill space with a forstner drill. Drill the holes for the switch & dc plug. Give the wood a wax polish. Solder the elektronics and check if everything works. Drill a hole through the base and in the swampwood. Screw the base and the swampwood together. Fill the underside with 2 components filler and smooth it. Mark the stand on a piece of leather and cut it out with a scissor. Glue the piece under the base and flame carefully the edges with a lighter. Plug it in, turn the switch and enjoy.
More from this channel
-
2:14
Stuffed paprika with meatballs and peppers recipe
-
1:07
Onion bacon cheese burger rings recipe
-
1:05
Bacon onion cheese burger rings recipe
-
2:55
German sweet yeast buns Recipe
-
1:58
Hungarian Sausage Goulash Recipe
-
1:29
Light up a Match by Batteries
-
1:30
Stuffed Tomatoes with Meat & Cheese Recipe
-
2:09
Sucuk Pan with Vegetables Recipe