2014 NISSAN GT-R - VDC, Transmission and Suspension Setup Switches
1,156 views · Published 18 April 2015 · 3:19 · Indexed 26 October 2026
Channel: Nissan Owner Channel · 2015 · Autos & Vehicles
Your GT-R is equipped with three unique control systems, exclusive to this vehicle, that allow you to change driving characteristics based on road conditions and your driving style. With the ignition ON, these three steps allow you to adjust transmission shift points, shock absorber damping force, and Vehicle Dynamic Control, or VDC. When you start your GT-R, all three systems will be in NORMAL mode, the center position. For everyday driving situations all three switches should be set to the NORMAL mode. Use the switch on the left to select your GT-R's transmission shift characteristics. For maximum performance and drivability, there are three modes: NORMAL, R and SAVE. Transmission response will differ depending on whether the automatic or manual shift mode is selected. In NORMAL mode, your transmission will change gears using shift points best suited for everyday driving. Push up on the switch for one second and the red light will flash as it shifts into R mode. In R mode, the transmission allows faster gear changes for maximum performance. Push down to return to NORMAL mode. While in the center position, push down on the switch and a blue light will flash as it shifts into SAVE mode. This mode should be used when driving on snowy or slippery surfaces. The center switch can be used to set the shock absorbers to any of these three modes: NORMAL, R and COMFORT. Push up for one second to select the R mode and a red light will flash. This mode is for enhanced handling and cornering. Push down on the switch to select COMFORT mode. This mode makes driving on rough roads more comfortable by adjusting the damping force. Use the switch on the right to setup the VDC. The Vehicle Dynamic Control (VDC) System uses various sensors to monitor driver inputs and vehicle motion. Under certain driving conditions, it controls brake pressure and engine output to help the driver maintain control of the vehicle. VDC, which should remain on when driving except when freeing the vehicle from mud or snow, cannot prevent accidents due to abrupt steering, carelessness or dangerous driving techniques. Always drive safely. The three VDC Modes are: NORMAL, R and OFF. Push up on the switch for more than one second to change to R mode. The red light will illuminate. In addition to the normal VDC operation, this mode also adjusts front and rear power distribution in the all-wheel drive system for enhanced handling. With the switch in the center position, push down for more than one second to turn the VDC system OFF. When this switch is in the OFF position, all VDC functions, excluding the ABS system, are cancelled. The VDC system should be turned off only briefly to help free the vehicle if stuck in snow or mud. It must remain on at all other times. When the ignition is turned OFF all three systems will reset to NORMAL mode. Consult your Owner's Manual for further details.
More from this channel
-
0:35
2015 NISSAN Juke - Shoulder Belt Height Adjustment
-
1:43
2015 NISSAN Murano - Connecting Procedure without Navigation (if so equipped)
-
0:18
2012 NISSAN Rogue - Tilt Steering Column
-
0:45
2015 NISSAN Murano - Parking Brake and Indicator
-
1:04
2015 Nissan Quest - USB/iPod® Interface
-
0:36
2015 Nissan Quest - Instrument Brightness Control
-
0:40
2015 NISSAN Murano - Turn Signals
-
1:33
2015 Nissan Quest - Push Button Ignition