Hubsan X4 H107C - How To Calibrate TX (Transmitter or Controller)

1,773 views · Published 19 December 2014 · 0:40 · Indexed 4 November 2026

Channel: Paul79UF · 2014 · Science & Technology

Watch on YouTube

This is a quick video showing how to perform the control sticks calibration on the Tx (transmitter or controller) for a Hubsan X4 H107C. 

It should be the same procedure for the H107D, H107 and H107L.

1. With the transmitter turned off, put both sticks to the upper left position.
2. Turn on the transmitter. The LED light will flash.
3. Rotate the sticks in several circles to calibrate the range of the controls.
4. Press and hold the lower right button (Aileron Trim - Right).
5. The LED will stop blinking and you will see "M2" on the display which stands for Mode 2.

More from this channel