Look Who it Was Random video

2015 NISSAN 370Z - Audio System with Navigation (if so equipped)

1,129 views · Published 18 April 2015 · 3:38 · Indexed 8 November 2026

Channel: Nissan Owner Channel · 2015 · Autos & Vehicles

Watch on YouTube

"If your vehicle is not equipped with this audio system please see your Owner's Manual for operational procedures.

Press the center of the VOLUME/ON-OFF control to turn your system ON or OFF. Turn the control to adjust volume. Your radio will play FM and AM stations, and if so equipped, will tune in SiriusXM Satellite radio. Choose a radio band by pressing the FM/AM button or, if so equipped, the SAT button.
 

To manually tune the radio, turn the TUNE/ FOLDER/ AUDIO control left or right. To tune and stop at the next broadcast station, press the TRACK or SEEK/ CATEGORY buttons.

If playing a CD, pressing the TRACK button will also advance to the next track. Press the SEEK/ CATEGORY button to skip to the beginning of the current track.

Press these buttons several times to skip forward or backward through several tracks. Press and hold either of these buttons to rewind or fast-forward. You’ll also use the SEEK/ CATEGORY and TRACK buttons to navigate MP3 CDs. To eject a CD, press the EJECT button.

When you press the SCAN button it will seek out - and stop for five seconds at each station along the dial. When you reach a station you want to listen to, press again to stop.

You can set up to 36 stations in your audio system’s memory, to be recalled at your convenience. You can store a combination of up to six AM, twelve FM, and if so equipped, 18 SiriusXM Satellite Radio presets.

First press the FM/AM button to select from the following radio bands: AM, FM 1 and FM 2. Or, if so equipped, press the SAT button to access the SiriusXM1, XM2 and XM3 bands.

Now tune the radio to the desired station. Press and hold one of the preset buttons, one through six, until the radio mutes and you hear a beep, indicating that station has been set in memory. The radio will then resume play. Store additional stations on the band of your choosing by repeating these steps. To play a stored station, select the correct radio band, then press the corresponding preset button, one through six.

To load a CD, the ignition must be at ACC or ON. Carefully insert the disc into the slot, with label side up. The CD will automatically be pulled into the slot and start to play.

When you are listening to the radio and you would like to play a CD that is already loaded, press the DISC/AUX button. You can also press this button to play devices plugged into the auxiliary input jacks.

Press the REPEAT/ RANDOM button while a CD is being played to change the play pattern among: one track repeat, one disc random and normal play. This feature also changes the play pattern of MP3 discs and optional features, such as iPods®.

To adjust audio settings, you’ll press the AUDIO button. It can adjust Bass, Treble, Balance and Fade. Press the AUDIO button repeatedly until the audio effect you want to adjust appears in the display. Then turn the TUNE/ FOLDER/ AUDIO control left or right to adjust it to the desired level. Once you have finished adjusting the
 

feature, press the AUDIO button until the Radio or CD display appears. You can also adjust these features by pressing the SETTING button and selecting the “Audio” menu.

If your vehicle is equipped with Speed Sensitive Volume, you can use this feature to make the audio louder at faster speeds and quieter at slower speeds. You can  adjust the Speed Sensitive Volume by pressing the SETTING button on the control panel and selecting the Audio menu.
"

More from this channel