Look Who it Was Random video

Review: Matek FCHub VTX F405 OSD Flight Controller Build!!! (10.27.2017)

4,985 views · Published 26 October 2017 · 12:17 · Indexed 6 November 2026

Channel: MindOf BoomBoom · 2017 · Entertainment

Watch on YouTube

Matek has combined its pdb & its vtx into one AWESOME product.  The matek FCHUB VTX video transmitter is the combination of the Matek PDB and its Matek VTX-HV 5.8G 40CH 25/200/500mW  video transmitter. The FCHUB PDB. The result is a package that pretty much does it all. Combined with the F405 OSD, this is a powerful stack that can speed your drone off to infinity and beyond!!!.

Link to FCHub-VTX: https://goo.gl/pHVcCb

Specification :
Brand name: Matek Systems
Item name: FCHUB-VTX 
Weight: 14g (w/ MMCX whip antenna)
Size: 36*45*7mm w/30.5mm mounting

Input voltage: 6~27V(2~6S LiPo)
PDB: 4*30A (4*46A, 5 seconds)
Current Sensor: 184A (Scale 179)
BEC Output: 5V/1A for Camera or FC

VTX: 40 standard 5.8G channels, A/B/E/F/R Band
VTX Output Power: 25, 200, 500mW switchable
Traditional button+LED control of frequency and power
BFCMS (BFOSD & LUA Script) control via FC UART _TX
Video signal & TX5 are ready on FFC connected with MATEK FC F405-OSD
Silicon wires connection with other brands FC
Firmware upgradeable

 VTX Power Consumption: 3.1W Max. @ 500mW
Video Input Impedance: 75 Ohm
Audio Subcarrier Frequency: 6.5 MHz
RF Connector: MMCX
Video Format: NTSC/PAL

Pacakge included:
1* FCHUB-VTX board
1* MMCX to SMA Female, RG178 cable 9cm
1* MMCX 5.8G whip antenna, RG178 8cm
1* Rubycon ZLH 35V/470uF Low ESR capacitor
Link to Connection Guide: : http://www.mateksys.com/?portfolio=fchub-vtx

Link to Matek F405 OSD: https://goo.gl/3enZZh

Specification:
Brand: Matek Systems
Item name: Flight Control Board
Size: 36x36mm
Mounting hole: 30.5mm
Weight: 7g
MCU: 168MHz STM32F405
IMU: 32K ICM20602 accelerometer/gyro (SPI)
Support 32K Gyro update & 16K PID Loop
OSD: BetaFlight OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP, UART1, UART2, UART3, UART4, UART5
Built in inverter for SBUS input (UART2-RX)
PPM/UART Shared: UART2-RX
Support SoftSerial on S5 & S6
Battery Voltage Sensor: 1:10
Currsnt Sensor: No (FCHUB-6S option)
BEC 5V & 10V: No (FCHUB-6S option)
LDO 3.3V: Max.300mA for Spektrum RX
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes

Firmware based on OpenSource BetaFlight 

Features:
-2x LEDs for FC STATUS (Blue, Red)
-6x PWM / DShot outputs without conflict
-5x UARTs
-1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Sginal/GND
-4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
-1x Side-press button for BOOT(DFU) mode
-1x 16pin bottom mounted FFC Slot for FCHUB-6S connection
 
Package included:
1x flight control board
1x 0.5mm*16Pin 5cm Flexible Flat Cable
4x M3 Anti-vibration Standoffs
Link to Connection Guide: http://www.mateksys.com/?portfolio=f405-osd

Other reviews for the Matek F405 OSD and Matek FCHUB VTX
https://www.youtube.com/watch?v=ofcoVx13EV0
https://www.youtube.com/watch?v=atIrkknzyaI
https://www.youtube.com/watch?v=Nb_P0NOFSq8
https://www.youtube.com/watch?v=EKgBm1EiGuE


My Links
Please Subscribe! 
http://www.youtube.com/subscription_center?add_user=themightythor1212

Join Fullscreen, INC the best Youtube MCN 
http://apply.fullscreen.net/?ref=themightythor1212

My Instagram: https://www.instagram.com/themtythor/

MyTwitter:
http://www.twitter.com/themightythor

MySpace:
https://myspace.com/themightythor1212

Add me on Google+:
http://gplus.to/TheMightyThor

My Youtube Channel:
http://www.youtube.com/user/themightythor1212

More from this channel