SureTrace™ Circuit Tracer Safety Tip
3,524 views · Published 23 December 2015 · 2:43 · Indexed 16 November 2026
Channel: Ron Kipper Formerly From IDEAL · 2015 · Science & Technology
Here is the link to the IDEAL SureTrace product page. https://www.idealind.com/us/en/shop/product-type/testers/circuit-tracers.html Here is a safety tip when tracing live circuits with the SureTrace™ circuit tracer from IDEAL. When using the test leads and the outlet plug, alligator clips or blade prong lead adapters that are supplied with the kit, it is important to remember that the potential for an exposed Hot conductor exists. If both test leads are plugged into the transmitter and one test lead is connected to a hot conductor any exposed tip of the second test lead is also at or near Hot potential due to conduction through the transmitter circuitry. The current is limited to a few milli-amps and is unlikely to be dangerous, but it still presents a shock or startle hazard. The safest way to avoid this is to trace the Neutral conductor whenever you can. But, this is not always possible, so I will describe here the safest way to trace a segment of a hot conductor along a section of branch circuit wiring using a Remote Return Path to ensure we get the strongest signal to trace. Take the 3ft and 25ft connecting leads plus two of the blade adapters supplied in the kit and fit the blade adapters to the ends of the leads, noting that they will only fit at one of the ends. Uncoil the leads and lay them out along the route they will be taking. Bear in mind that they will be carrying live voltage during testing, so make sure they are not in an area that the public has access to and cannot become immersed in water or be susceptible to damage. Plug the blade adapter on the end of the long lead into the Hot socket of the first outlet. Then, plug the blade on the short lead into the Hot socket of the second outlet on the same circuit. Finally, plug both the free ends into the transmitter and turn it on. Note that the lightning bolt will not appear on the receiver in this case since there is no voltage across the transmitter terminals. When finished, unplug the leads from the transmitter THEN remove the blade adapters from the outlets. This technique ensures that you remain protected from coming into contact with the Hot potential by the shrouded jacks on the connecting leads. Following these tips will keep you safe when tracing lives circuits with the SureTrace circuit tracer. Call the IDEAL customer service line or visit our website to find out more about the circuit tracer and a local distributor you can buy one from. Thanks for watching I’m Ron with IDEAL. #RonKipperFromIDEAL #IDEALINDUSTRIES #SureTraceCircuitTracer #www.idealcircuit-tracer.com