Air Cannon #75 - Using Small 24 V Solenoid Valves
2,966 views · Published 2 June 2013 · 14:07 · Indexed 8 November 2026
Channel: Bill Gilmour · 2013 · Science & Technology
This video is about using smaller solenoid valves that run on 24 VAC to make up a smaller air cannon, such as a .177 or .25 cal. These small valves often have 1/4" NPT threaded connections. Such a valve is shown in this video, on a small test cannon made for this video. The problem with these small valves is that they may not want to open properly at pressures over 200 psi. when they are run on 24 VAC. This problem is demonstrated in the video, and then a simple cheap solution is shown that allows firing at higher pressures to be reliable. A scrap diode and capacitor from an old TV board were all that was required. Diode should be rated at least 1 A, the capacitor must be 50 V or better, and should be at least 200 uF or more. The scrap TV board shown in the video had lots of these on it. Finally, a .25 cal steel BB is fired into a pine block from the test cannon at 450 psi.
More from this channel
-
3:39
Small Tesla Coil SSTC
-
6:45
Spark Gap Tesla Coil
-
2:41
12kV Jacobs Ladder 2
-
2:22
Bluray Laser, Zinc, Sulfur, and Phosphorescence.
-
3:25
Green Laser Fog Effects
-
5:42
Let's Microwave #4 - Vacuum Tubes from an old TV
-
2:03
Let's Microwave #6 - Three CD's
-
0:40
Closeup of a UV Air Freshener while working