LED do it yourself night light DIY
526 views · Published 14 December 2016 · 2:25 · Indexed 19 November 2026
Channel: Food for Dude · 2016 · People & Blogs
LED night light from scrap wood and acrylic. Saw of three slices from the banch and two rectangular pieces acrylic glass. Stack all parts together and mark the edge on the acrylic glass pieces. Saw the acrylic parts stack it again and drill a big center hole and smaler holes for screws right and left. Then screw everything together and grind the outside. Draw a base on which the piece of wood fits & the slices have to cover the battery compartment and the space for the switch. Mark the battery compartment saw it out and drill a hole for the switch. Grind the edge and check if the batteries and switch fits. Drill small holes to screw the base to the upper part and wide the holes with a sinker drill. Screw both parts together with small screws. Solder 2 leds together to plus and minus cables. You need two of them and cover the solder joints with shrink tube. Stick the leds to the height of the acrylic glass. Short the cables, twist the plus and minus together and solder them to the battery compartment. Screw everything together stock the battery compartment and check if it works. Look at my other work.
More from this channel
-
2:14
Stuffed paprika with meatballs and peppers recipe
-
1:07
Onion bacon cheese burger rings recipe
-
1:05
Bacon onion cheese burger rings recipe
-
2:55
German sweet yeast buns Recipe
-
1:58
Hungarian Sausage Goulash Recipe
-
1:29
Light up a Match by Batteries
-
1:30
Stuffed Tomatoes with Meat & Cheese Recipe
-
2:09
Sucuk Pan with Vegetables Recipe