Guitologist "Pixie" (Hammond AO-44 Tube Guitar Amp Conversion)

4,591 views · Published 24 November 2014 · 8:41 · Indexed 12 November 2026

Channel: The Guitologist · 2014 · Science & Technology

Watch on YouTube

SCHEMATIC: https://www.facebook.com/guitologist/photos/p.626216020837443/626216020837443/?type=1&theater

Here's my spin on a Hammond AO-44 conversion. You'll see a lot of these converted for guitar. Some use only the stock ECL86 (6GW8) triode-pentode tubes, others add 12ax7 tubes in the pre. Lots of things you can do with them. This one utilizes a 6GH8A triode-pentode up front, through a volume, a single knob tone stack with treble boost, and finally into the modified ECL86 circuit. The AO-44 originally was a reverb amp inside a Hammond organ. It used a single triode in the preamp with no cathode filtering, into a cathodyne phase splitter and finally into the pair of pentodes in push-pull mode. So, there is really only one triode in the preamp of the original version. The second triode is 'wasted' in phase splitting. With the 6GH8A up front, this little Pixie comes alive and grows wings!

More from this channel