JYETech DSO138 Kit Build and Test

3,307 views · Published 4 December 2016 · 13:29 · Indexed 6 November 2026

Channel: learnelectronics · 2016 · Entertainment

Watch on YouTube

JYETech DSO138 Kit Build and Test
This is my build and first test of the JYETech Digital Storage Oscilloscope 138. It took me about 8 hours total to put it together, but 2 hours of that was replacing a mis-soldered capacitor and another hour of trouble-shooting after the initial boot-up was a dud.
This kit is very nice, but somewhat difficult to solder. The 40 pin header for the LCD screen had to be re-flowed before things worked. You also must short(solder bridge) JP3 & JP4. JP4 brings 3.3v to the mcu and JP3 enables the inverter.
A follow up video will have usage, controls & a short review.

-~-~~-~~~-~~-~-
Please watch: "Arduino Power Monitor" 
https://www.youtube.com/watch?v=EihF17x0NXA
-~-~~-~~~-~~-~-

More from this channel