How To Assemble Ryonet's New Aluminum Scoop Coater

2,072 views · Published 15 October 2015 · 1:17 · Indexed 14 November 2026

Channel: Ryonet · 2015 · Education

Watch on YouTube

Ryonet's new scoop coater will be available soon at http://www.screenprinting.com/

TRANSCRIPT:
Hey screen printers it's Ryan from Ryonet, in this video we will show you how to install the end caps for Ryonet's new scoop coater.

When you get your scoop coater the stainless steel end caps will come separately with instructions and the appropriate self threading machine screws

Before installing the end cap ensure all the edges of the scoop are smooth, we’ve included a fine grit sand paper for you to do this. 

I like to install one end cap at a time by placing the scoop coater vertically, you want to be careful not to ruff up the end of the coating edge, this should be smooth for optimal coating.

To install Simply fit the end cap on the end of the scoop coater and screw in the machine thread screws using a #1 philips screw driver. If you have an electric or battery screw driver use this as it will be easier but you need to be VERY careful not to strip the screws.

We’ve included extra screws in case you strip them, keep these in a safe place for future use.

Tighten until they are hand tight they’re fairly easy to strip so do not over tighten to avoid this. 

Once you are done double check everything went together ok, there should be no visible space between the coater end cap and the coater itself.

Check out this new coater available on screen printing.com and be sure to sure to subscribe to our youtube channel to see more videos on coating screens and screen printing.

Check out our facebook page: https://www.facebook.com/ryonet

Find us on Twitter and Instagram: @Ryonet

More from this channel