Microchip Instrumentation Amplifier with mCAL Technology

2,957 views · Published 2 December 2011 · 3:24 · Indexed 3 October 2026

Channel: Microchip Technology, Inc. · 2011 · Science & Technology

Watch on YouTube

http://www.microchip.com/ard00354 The MCP6N11 and MCP6V2x Wheatstone Bridge Reference Design demonstrates the performance of Microchip's MCP6N11 instrumentation amplifier (INA) and a traditional three op amp INA using Microchip's MCP6V26 and MCP6V27 auto-zeroed op amps. The input signal comes from an RTD temperature sensor in a Wheatstone bridge. Real world interference is added to the bridge's output, to provide realistic performance comparisons. Data is gathered and displayed on a PC, for ease of use. The USB PICmicro® microcontroller and included Graphical User Interface (GUI) provides the means to configure the board and collect sample data.

More from this channel

• 4:12 MCP172x and MCP182x family of LDOs from Microchip Technology

  Microchip Technology, Inc.

  346 views · 17 December 2008

• 6:54 Introduction to the UNI/O™ EEPROM Family Part 2 of 2

  Microchip Technology, Inc.

  763 views · 23 December 2008

• 1:42 CodeGuard Device Implementation Overview

  Microchip Technology, Inc.

  683 views · 18 February 2009

• 2:54 Programming, Debugging and Code Development for CodeGuard Devices

  Microchip Technology, Inc.

  1,054 views · 18 February 2009

• 8:23 Waking Up from Deep Sleep and Firmware Overview

  Microchip Technology, Inc.

  2,446 views · 22 April 2009

• 3:15 MCP6SX2 PGA Thermistor PICtail Demo Board

  Microchip Technology, Inc.

  489 views · 14 May 2009

• 1:25 Overview of EUI-48 enabled MAC Address Chips

  Microchip Technology, Inc.

  590 views · 3 June 2009

• 2:04 Typical Application Setup for EUI-48 enabled MAC Address Chips

  Microchip Technology, Inc.

  807 views · 3 June 2009