Thermistor Liquid/Water Level LED Indicator Circuit

4,501 views · Published 10 November 2013 · 10:07 · Indexed 16 November 2026

Channel: electronicsNmore · 2013 · Science & Technology

Watch on YouTube

Here is a very useful liquid/water level indicator circuit which I designed. The circuit is made around an LM339 quad comparator. The principle is very similar to what is used in low fuel indicators. As long as the circuit is properly made, and you are NOT using it in a tank of heated liquid/water, you can expect very good results. Though the circuit can be modified for fuel tanks (by reducing current flow to the thermistors to prevent possible sparking, gas & oil resistant heat shrink tubing and wire), the INTENDED use is water and other non-flammable liquids. I will be using this circuit to monitor the water level of an inground cistern which catches rain water. I will be able to push a button momentarily, and within 10-15 seconds, know what the approximate water level is. Power can also be left on continuously if needed. Liquid/Water level Increments are 1/4, 1/2, 3/4 , Full. Ambient temperature fluctuations have little if any effect on the operation of the circuit once it is properly adjusted using the 2K POT, especially on an inground storage tank.

Link to the schematic is here:

https://postimg.cc/hz04tb08

Thanks For Watching! Please support this channel by SUBSCRIBING, SHARING, rating THUMBS UP, and POSTING LINKS.

More from this channel