Supply Systems - Building Systems Mock Exam - Architect Registration Exam - ARE Live

3,065 views · Published 11 December 2015 · 5:49 · Indexed 25 October 2026

Channel: Black Spectacles · 2015 · Education

Watch on YouTube

To view the related course, click here:
http://bksp.es/yt-building-systems-11-11-15

Download the Mock Exam-
http://bksp.es/building-systems-mock-exam-11-11-15

ARE Prep powered by Black Spectacles-
blackspectacles.com/courses

Mike's Recommended Resources to pass the ARE:
http://blackspectacles.com/blog/books-need-to-pass-are-exam-resources

All right, number five. So this is a little bit of a trick one that's meant for you, to make sure you're reading it. In a typical tenant office construction...so it's an office-building, bunch of tenants in the building. It uses the tenants, so there's lots of different people. The supply system is usually ducted plenum, always cooling, and a VAV box. The thought here is that ducted seems way too simple of an answer. That plenum, that sounds like a good word. VAV box, that also sounds like something interesting. The answer is actually A: Ducted.

In a typical system, in a typical office, I'm going to have a dropped ceiling. I'm going to have people working in the office, sitting at desks, doing what they're going to do and I have this big space above the ceiling where I'm going to be bringing a ducted supply. It's going to go all over the building and it's especially going to go over near the perimeter windows. Let's say we've got windows over here, and it's going to blow air into that space. That air is going to blow through, and keep everybody nice and conditioned.

Let me make clear my ceiling here, and then we're going to put essentially holes into that ceiling. Those holes will probably look very similar to the typical supply vent register. But there's going to be a hole into that ceiling and that whole space up here, the entire interstitial space above the ceiling and below the structural deck is going to be the plenum area. That plenum area is going to be attached to a duct that's going to be the return duct, and the supply ducts are going to be attached to those original ducts that we talked about. That return duct then essentially incorporates that entire interstitial space. 

So if I have the air-handling unit pushing air out through the supply system, then it will automatically create a vacuum behind it, and it's going to pull air from behind it. Well, where's it going to pull from? It's going to pull from the trunk lines of the return system. Where are they going to pull from? They're going to pull from the branch lines of the return system. Where are the branch lines going to pull from? Well, they're going to pull from these plenum spaces. 

So all of this space is essentially going to be a way for the air to get a vacuum, and pull that air up through. And it's going to want, all by itself, to get up into that space because of that vacuum pull. When all of that happens correctly that means that this thing is pumping air out into the space, into the locations that you need and want it, typically over by the edges, by the perimeter. Then allowing the return air to find itself way up into the plenum, and then from there into the return system, and then from there back into the air-handling unit, where it gets reconditioned and blown out, as supply air and as other things.

You have some outside air that is added in, so maybe humidification or dehumidification happens along the way. But that's the gist of that system of those office tenant kinds of scenarios. This is probably 80% of it is, just like this, so very, very common. If this thing had said the return system here, I would have said the answer was B: Plenum, but because it's talking about the supply system it would be ducted. 

It's quite possible that you could actually have it the other way. You can have a plenum supply system. It doesn't happen as often in this kind of scenario for various reasons, but it could. So there's lot of different ways you could it. But at least 80% of the time it's going to be something like this, so that would be much more expected on the exam.

Marc: One question here is, "Is the VAV box not the correct answer based on the fact that it's only part of a ducted system?"

Mike: Yeah, the VAV box, the thing that you don't know is the supply like I said, the vast majority of the time it's going to be ducted, but you don't necessarily know that it's going to be a VAV box. It could be a variable air volume box, a VAV box. It could be a CAV box, a constant air volume box. It could be that it's some mix of those two. There's a whole range. The VAV's are just a pretty common one, but there's a number of other common ones, as well. 

And so, yeah, that's not a bad answer. But I don't think it's as good an answer as just being ducted because that's really in play with the idea of the plenum. But yeah, I hear the question and I think that's a good question. It's just that there's a lot of other choices, as well.

More from this channel