Look Who it Was Random video

Brushless Beecheese frame - Freeride III - Trees and bushes

186 views · Published 24 September 2017 · 3:21 · Indexed 17 October 2026

Channel: Noctaro Quad · 2017 · Science & Technology

Watch on YouTube

Fun with trees and bushes.

My first design of a brushless micro quadcopter for 3d print.
 
It needs further PID tuning. It does fly using an old NAZE32 for the moment. Will be replaced with an  F4 board including OSD soon. 

It should fit a runcam swift. I just got none to test it ;/

The DYS 1104 7500KV motors work great as soon as you found the right settings for your filters. Otherwise they will burn your frame. Or themselfes. The filters will be quite a bit off to the standart settings. Yaw axis was worst. I had to reduce gyro lpf on yaw to 60hz to get a clean gyro line. This may have to do with the vibrations coming from the frame itself. The motor had most vibration around 150Hz, so i set notch 1 to 120-160hz. Dynamic filtering may do a great job, but i cant test it on this old F1 board.

I flew it using a 850mah 3S Lipo, wich might be a bit heavy for this setup. I would recommend around 600mah with at least 45C at 3S.

On 3S you can feel the power and also do some acro.

Link to the frame at thingiverse:
https://www.thingiverse.com/thing:2542139

Weight including Lipo:
170 gram

Motor to motor distance: 80mm (True X)

--------------------------
Visit my buddies:
-------------------------
stylesuxx
https://www.youtube.com/user/stylesuxx23

kuhdjaku
https://www.youtube.com/user/kuhdjaku
--------------------------

--------------------------
Awesome flightcontroller firmware: 
Betaflight 3.2.0 RC4
https://github.com/betaflight/betaflight
(Open Source)

Components:
Motors 
DYS 1104 7000KV 
https://goo.gl/mGteyH (link to quadrocopter-teile.at)

Props
2540 triblades
https://goo.gl/qYrMwk

ESC 
Racestar 4 in 1 12A using Oneshot 42 (Naze isnt DSHOT compatible, but ESC are)
https://goo.gl/CWm5G1 (Link to banggood.com)

Recommended flightcontrol
Omnibus F4 with OSD
https://goo.gl/3BXv5Z (link to banggood.com)

FPV cam/transmitter combo - TX03 (great image quality for its size, very leightweight)
https://goo.gl/aqRcHs

5V active Buzzer (take it, if you dont want to search your quad for hours and hours.)
https://goo.gl/ud4U5G

Further you need:
Transmitter and receiver of your choice. I use the Flysky I6 with SBUS mod
https://goo.gl/GwRqK4

FPV goggle of your choice. I use the Kylin Vision with Eachine DVR mod
https://goo.gl/1OyqmI

Music:
Daniel Crawford - Taste This [Argofox Release]

More from this channel