Raspberry PI 2, TI DAC8734 on Windows 10 for IoT - Software Review

2,022 views · Published 26 July 2015 · 35:03 · Indexed 30 October 2026

Channel: theBreadboard · 2015 · Science & Technology

Watch on YouTube

This is the third in a three part video covering the integration of the Texas Instruments DAC8734 Digital to Analogue converter. 

This video completes the series by looking at the software and sme of the deployment options for the Windows 10 IOT on the PI, I will walk you through the DAC library and the UI pages giving a brief description of each part of the code, all the files are available on the Element16 Post I created (Link Below)

Part 1looks at the DAC and the PI working and reviews the functionality of the UI and also the DAC chip
Part 1 of this series is here:- https://www.youtube.com/watch?v=iohVrsXMrKY

I had issues with the SPI us and part 2 is a review of what was wrong and how I fixed it. It also would serve as a good primer on SPI functionality
Part 2 is here:-https://www.youtube.com/watch?v=uKwF8N27o6Q


This chip was of particular interest to me as it has the ability to output up to +20V when running in Unipolar mode or -10 to + 10 volts in Bipolar mode and it has a very good linearity and better than 1bit accuracy after calibration. It has built in calibration registers for zero and gain for each of the four channels. so the coder dows not have to keep adjusting the desired output to compensate for errors.

Windows 10 IOT still shows a few issues with the SPI bus performance but outside of that, everything went well and the current version of windows 10 for IOT is a good improvement over the initial release. this will again change in a couple of weeks i expect when the production version of Windows 10 and the Visual Studio SDKs are released to support the to be released updated IOT software.

If your going to keep developing on Windows 10 for IOT and the PI between now and the ned of july 2015, use the RC version or you wont be able to develop for ARM or deploy the app.

You can find a text post on the Element14 community web site http://www.element14.com/community/community/raspberry-pi/blog/2015/07/26/raspberry-pi-20-windows-10-and-how-to-drive-the-dac8734-from-ti-aka-the-dac8734evm-road-test-board and this includes the source code of the UI seen in the video and on the E14 web site

More from this channel