33-793 OmniSeal™ Pro XL Compression Hip Kit
3,680 views · Published 14 March 2018 · 3:03 · Indexed 6 November 2026
Channel: Ron Kipper Formerly From IDEAL · 2018 · Science & Technology
Here is the link to the IDEAL Datacom product page. https://www.idealind.com/us/en/shop/product-type/datacomm.html The 33-793 OmniSeal™ Pro XL Compression Hip kit from IDEAL is our bestselling coax compression tool kit for the professional installer who works daily installing coaxial cables. Cut, strip and terminate F, BNC, RCA and RG-11F coaxial connectors onto RG-11, RG-59, RG-6, RG-6 Quad and Plenum cables in one handy professional tool kit. All IDEAL compression connectors are compatible with our flagship OmniSeal™ Pro XL compression tool. Unlike most compression tools which require adjustments and adapters for each type of connector, this compact 6¾ inch length tool compresses nearly all IDEAL compression connectors with no adjustments to the tool. F/BNC/RCA and RG-11 F connectors can all be terminated one after another with no setting changes. Only the 90 degree connectors require the post to be lowered. Patented dual spring clips and the fixed top ledge enable this tool to compress more connectors than any other tool on the market. The adjustable spin knob allows for compressive forces to be placed on the rim of the connector instead of the bottom of the nut when required. This is helpful for non-IDEAL plastic centered connectors such as 50Ω BNC‘s or RCA‘s with limited structural support. It can also be used as a larger flat surface to compress against for other types of non-traditional compression connectors. The adjustable post and spin knob, combined with three compression surface levels, give the installer virtually unlimited options for compressing current and future connector designs. The post is in the preset factory setting when the tool is closed and the end of the post is even with the largest graduated mark in the tool. The kit includes the OmniSeal™ Pro XL CompressionTool, PrepPro™ Coax and UTP cable stripper, Data-T® Cutter, and durable rubber pouch with belt clip. Using the OmniSeal™ Pro XL compression tool to install a compression F connector is easy. Step one cut the cable to length and create a 2 step strip exposing ¼ inch of center conductor and ¼ inch of braiding. Then fold back all the braiding over the outer jacketing of the cable. Step two push the compression F connector onto the cable until the white dielectric is even with the hole in the bottom of the nut. Step three insert the connector into the LinearX3 tool and close the handle to fully compress the F connector. If you would like to learn more about the OmniSeal™ Pro XL Compression Hip kit from IDEAL contact our customer service department or visit our website Thanks for watching I am Ron with IDEAL. #RonKipperFromIDEAL #IDEALINDUSTRIES #IDEALDatacom