Garage Door Spring Adjusting
1,178 views · Published 14 January 2015 · 2:38 · Indexed 14 November 2026
Channel: rpeek · 2015 · Comedy
The garage was attached to the back of my neighbor’s house, which used to be the scale house for the Limestone Quarry. This building was what they called the “summer kitchen.” He was going to tear it down, and asked me if I wanted it for the lumber. I did. I jacked it up and put 16 foot hemlock skids under it, and drug it across the ice with a John Deere tractor in February and set it where it is now. Put a concrete floor under it and knocked out the end that wasn’t already missing. Then I needed doors. My other neighbor had 5 sets of old wooden garage doors and door tracks and stuff in the old dynamite shed out by the old quarry that he said I could have if I wanted to get them out of there. So I took the pile, and assembled pieces and parts to get two working doors. I used another door for one of the side walls in the back shed. I used another one to make the walls for the garden shed out back, and I cut up the rest for the wood and stuff. I used the springs I had, but also found some more springs about a year ago in a yard sale. The original springs I used were too small but they worked. Yes I did acquire an automatic garage door opener in a yard sale. Got two for $25 and put one up and it worked, but the weight of the door caused the plastic gear inside to strip. I figure I can get the gear out of the other door to replace it with, but no need doing that if it’s just going to strip again, so first I need to do the spring work. That’s what brings us to now… By the way, you can see the video of me moving and constructing the garage in a video titled "Moving the Free Barn" kind of sums it up..