Introduction to Automation
4,149 views · Published 30 March 2016 · 35:48 · Indexed 4 November 2026
Channel: theBreadboard · 2016 · Science & Technology
This is an introduction to a new series I will be presenting on Automation and will be split into two streams Home Automation Industrial Automation The Home Automation of course will cover automating things in the home, including lighting, Heating and Air Conditioning (HVAC), Security, Water, appliances and other fun things. during this series I will be using commonly available parts like Arduinos, Raspberry PIs, TI Launchpads etc, + basic components and modules (Temperature Sensors, Humidity, Pressure etc). Where possible the parts will be referenced to RS-Components as RS is kindly sponsoring me for many of the parts used in this project For the Industrial side of things I will be presenting commercial PLCs, HMI's and other ready built modules, there is an overlap between some of the modules and PLCs used for home and industry as they are cheap enough plus the principals of operation are the same Outside of the hardware I will cover communications between devices in a system and also out onto the internet using open source protocols and common wiring including MQTT, ModBus, Ethernet, WIFI, RS485. Controlling Steppers, Lights, Solenoids and other devices will be shown from low voltage up through Mains. Finally there will also be practical examples of building the circuits including touch screen controls and programming to complete the learning :) and to make the various devices interoperate. All code etc will be posted for you to use along with any schematics. If you have requests of what you would like to see, please make a comment below and I will see what I can do, this will be subject to availability of parts from various vendors and my sponsors. I hope you will enjoy the ride. Oh, for those interested and have been patiently waiting, this will also cover how to automate the Lab Power System (Bench Power Supply, DC Load etc. By the end of the series, if you follow along you should be able to build your own automation system or at least have a very good idea how they work and what to expect.
More from this channel
-
2:18
Agilent U1272A vs U1273A Sunshine test
-
3:41
Agilent U1272A vs U1273A Indoor test
-
5:43
33622A #2 Review: PrepowerUp
-
11:57
Measuring Components with a squarewave, Pt 3 - The Math
-
6:03
RPI B+ and the EnOcean Sensor Kit Overview of Up Comming Blogs and Videos
-
3:36
TDR #5 RG6 Maths
-
11:37
TDR #6 UTP Measurement
-
9:58
Resistance Standard