Site Restrictions and Preventing Conflicts - PPP Mock Exam - Architect Registration Exam | ARE Live
1,115 views · Published 19 June 2016 · 10:09 · Indexed 23 October 2026
Channel: Black Spectacles · 2016 · Education
ARE Prep powered by Black Spectacles- blackspectacles.com/courses Mike's Recommended Resources to pass the ARE: http://blackspectacles.com/blog/books-need-to-pass-are-exam-resources All right, number ten: Your house client has certain restrictions on their site that include exterior siding material, slope of the roof, and permitted uses for exterior spaces. Where are these restrictions likely from? Well, we just talked about easements, and it doesn't really seem to make sense from that standpoint. Zoning department, there are a few examples. I remember Aspen and places like that have a lot of that kind of stuff in their zoning. But the vast majority of zoning wouldn't get into that level of detail. Market study would be potentially interesting. It's kind of like amenity stuff that we just talked about. But the actual answer here is covenants. That's a word that's worth knowing. Covenants are when a private development...think of it as like a gated community, and all the houses are all brick, or all the houses are clobbered siding and they all have pitched roofs, no flat roofs, or something like that. That means they're following the covenant. Again, it's riding with the deed. It's something that you would have to respond to. You can't just ignore covenant because it's contractual. But it's not from the zoning code. It's not a municipality-run thing. So, covenants, that shows up often on these kinds of exams. We got one last bonus one here. This is directly from one of the NCARB ones. I just put this in here because this is totally the kind of thing that they are likely to ask in some form, so I just want to make sure you don't forget this part of it. The most appropriate strategy for predicting and preventing conflicts between the architectural and engineering documents is to: hold regular coordination meetings. I do love the idea of having the owner review the drawings. That would be pretty amusing. But the answer is absolutely A, that they want you to regularize the process so that there's a clear way for people to see what the issues are, to understand each other's agendas so that everything can meld together. For a bigger project, you might be doing it every two weeks, for the whole process of schematic and maybe early design development, and then maybe a little bit less than that through construction documents, and then a lot again when you're getting the coordination worked out. In other situations, for a smaller project, it might be just two important meetings, something for a house or something like that. So, what regular means is really dependent on the situation, but the idea that you're creating a system of communication is hugely important. That's absolutely something that NCARB and AIA would want you to be thinking about. You're looking for information on that kind of thing, check out The Architect's Professional Handbook that's produced by AIA, because they'll talk about those kinds of issues in there pretty clearly. All right. How'd we do? Marc: Awesome. We're down to two lucky winners here. Looks like we have Kristen L. and Robert P. You two made it all the way to the end - 100%. Mike: Way to go, Kristen and Robert! Marc: I think it was question six here that really got everybody. We have a ton of questions here. Maybe we'll take two of them here before we head out. Let's grab a good one. This is from Laurie H. She says, "Isn't occupancy and use considered part of the zoning of the building? Why use one specific word instead of the broader term in that question? Where are you allowed both occupancy and use to be?" Mike: The reason that I'm loose about using those two terms is that, in different codes, they'll use occupancy; in other codes, they'll use use. But also, in a lot of the guidebooks, they'll use them interchangeably. You'll find that one code will use one of those words. Whatever that code is, you'll use that word.
More from this channel
-
4:13
3Axis Digital Fabrication | Kansas City | Black Spectacles
-
2:08
Speculations on Design Technology with Erin Rae Hoffer & Scott Simpson | Black Spectacles
-
3:22
David Fano and Steve Sanderson of Design By Many | Black Spectacles Interview
-
1:50
The Un-Competition Project | Black Spectacles
-
0:35
Revit Tutorial: Introduction to Curtain Wall Families in Revit Architecture | Black Spectacles
-
2:53
Revit Tutorial: Types of Curtain Walls | Black Spectacles
-
9:55
Revit Tutorial: Building a Stick Curtain Wall | Black Spectacles
-
0:36
Revit Tutorial: Introduction to Door Families in Revit Architecture | Black Spectacles