ZVS Driver - Three Different Coils
4,992 views · Published 14 April 2013 · 6:29 · Indexed 25 October 2026
Channel: Bill Gilmour · 2013 · Science & Technology
I was playing around with one of my zvs drivers and decided to hook up a flyback, an iron core coil, and an air core coil for induction heating. The flyback is small, the core being about 1.5" x 2". The primary is 15 + 15 turns of solid hookup wire. The secondary is layers of #34 wire insulated with paper and epoxy. Th coil form was turned on a lathe from corian (countertop) plastic material. The iron core coil is 4" long with a center tapped primary for zvs use. The secondary is about 15 layers of #28 wire insulated with paper and resin. The third coil is air core, 8 + 8 turns of 10 ga solid wire, 1 1/4" diameter center. It is used as a small induction heating coil here and heats a small piece of stell strapping red hot. So, one zvs, three very different coils.
More from this channel
-
3:39
Small Tesla Coil SSTC
-
6:45
Spark Gap Tesla Coil
-
2:41
12kV Jacobs Ladder 2
-
2:22
Bluray Laser, Zinc, Sulfur, and Phosphorescence.
-
3:25
Green Laser Fog Effects
-
5:42
Let's Microwave #4 - Vacuum Tubes from an old TV
-
2:03
Let's Microwave #6 - Three CD's
-
0:40
Closeup of a UV Air Freshener while working