Air Cannon #81 - .25 Cal BB Cannon Electronic Control Mod
760 views · Published 16 June 2013 · 5:06 · Indexed 6 November 2026
Channel: Bill Gilmour · 2013 · Science & Technology
The .25 cal BB cannon is based on a 120VAC solenoid valve. This cannon worked by simply switching the line voltage to the solenoid with a momentary contact pushbutton switch. This was very wasteful of air, and this valve was in dire need of electronic control. A 555 based one shot circuit with variable pulse width is triggered by the cannon's firing switch on a long cord. A potentiometer sets the pulse width. This drives the gate of a mosfet which controls the solenoid. Rectified mains is filtered by a 33uf 250V capacitor giving 170 VDC to power the solenoid. A 150 ohm 15 watt resistor is on the live side of the line input to limit current. A small transformer based 12VDC supply powers the 555. A schematic is shown in the video. This mod makes the cannon use air efficiently now. Even the test shots off 125 psi shop air went through the .040 thick aluminium test target with much less air use per shot.
More from this channel
-
3:39
Small Tesla Coil SSTC
-
6:45
Spark Gap Tesla Coil
-
2:41
12kV Jacobs Ladder 2
-
2:22
Bluray Laser, Zinc, Sulfur, and Phosphorescence.
-
3:25
Green Laser Fog Effects
-
5:42
Let's Microwave #4 - Vacuum Tubes from an old TV
-
2:03
Let's Microwave #6 - Three CD's
-
0:40
Closeup of a UV Air Freshener while working