Air Cannon #70 - New .177 BB Cannon
1,366 views · Published 25 May 2013 · 10:55 · Indexed 28 October 2026
Channel: Bill Gilmour · 2013 · Science & Technology
I made up a BB cannon, cal .177, for steel BB's. It uses a 6" x 1 1/8" air reservoir and a 1/4" solenoid valve. The valve is 24 VAC but I found that I got better triggering by using DC, so I added a rectifier and 680 uF capacitor. The barrel is a 36" brass tube inside a steel sleeve. The BB's are loaded at the breech and held by a magnet, a sliding sleeve covers the loading port. The cannon is fired by a firing switch on an 8 foot cord. I have also made a 250 BB magazine for semi-auto firing. It will be shown the in next video. The cannon was tested with the chronograph. Velocities were from 300 fps at 125 psi to 500 fps at 500 psi. Several targets were then fired on, pop can, plastic square, wax block, banana, balloon, and water balloon.
More from this channel
-
3:39
Small Tesla Coil SSTC
-
6:45
Spark Gap Tesla Coil
-
2:41
12kV Jacobs Ladder 2
-
2:22
Bluray Laser, Zinc, Sulfur, and Phosphorescence.
-
3:25
Green Laser Fog Effects
-
5:42
Let's Microwave #4 - Vacuum Tubes from an old TV
-
2:03
Let's Microwave #6 - Three CD's
-
0:40
Closeup of a UV Air Freshener while working