Blade 130x Maiden Flight
2,037 views · Published 30 June 2012 · 3:58 · Indexed 18 October 2026
Channel: Hugocraft · 2012 · Science & Technology
Blade 130x maiden flight. Only thing I did was tighten up the main and tail blades until they would stay in place and not flop around. First impressions is that it has some serious head speed and you can hear it go from normal, ST1 which is flat 75 and ST2 which is 100 flat. I go back and forth experimenting. I did have 5% expo on the rudder even though the manual says to use none but I think it could use couple more % since the nose is sensitive. The only problem I found was when I would piro using only my left thumb meaning not touching the right stick, it would piro off axis. It would tilt away from level and it's probably a CG issue. Also the motor was really really HOT just under 4 minutes of flying but the battery was barely warm at 3.75v per cell afterward. **Sorry the hat camera was too low and it goes high out a frame a few times**
