Lamello Clamex P-14 Joining 16mm panels

1,902 views · Published 4 May 2016 · 0:57 · Indexed 1 November 2026

Channel: Axminster Tools · 2016 · Howto & Style

Watch on YouTube

This is a truly amazing connector with a host of uses. 

Lamello has overcome many design assembly problems with this clamping connector; it is almost totally invisible, only a single 6mm hole shows. 

The Clamex P is a biscuit shaped fitting with a ‘T’ profile that slides in place, no screws or glue are needed. Having a pivot lever and two alignment studs, this lever is driven using a hexagon key though the 6mm hole, locking the fitting together forming a very secure joint. Ideally suitable for connections up to 45° in 18/19mm panels and for 90° connections in 16mm panels. 

The required slot is cut using a Lamello Zeta biscuit jointer specially developed for this application, cutting the slot and adding the ‘T’ to the bottom using a unique vertical mechanical drive. 

Made from fibreglass reinforced plastic, lever zinc die-cast for strength (tensile fitting strength 1000N = 100kg). Overall length is 66mm x width 27mm, each half has a depth of 14.5mm and it is 7mm in width (9.7mm o/a with ‘T’). Supplied as a pack of 80, 300 or 1000.

For options and to purchase: http://www.axminster.co.uk/lamello-clamex-p-14-zeta-connector-ax945768

More from this channel