2014 NISSAN GT-R - Headlights and Exterior Lights
317 views · Published 18 April 2015 · 2:05 · Indexed 6 November 2026
Channel: Nissan Owner Channel · 2015 · Autos & Vehicles
The daytime running lights automatically illuminate when the engine is started with the parking brake released. The daytime running lights operate with the headlight switch in the OFF position. Turn the headlight switch to the position for full illumination when driving at night. If the parking brake is applied before the engine is started, the daytime running lights do not illuminate. The daytime running lights illuminate once the parking brake is released. The daytime running lights will remain on until the ignition switch is pushed to the OFF position. To turn ON your front parking lights, side marker, tail lights, license plate light and instrument panel lights, turn the headlight switch to THIS position. To turn ON the front headlights, turn the switch to THIS position. All the other lights will stay ON except the daytime running lights which will turn off. To turn ON your high beam lights, push this lever forward. You'll see a blue indicator light illuminate. Pull it back toward you to select low beam. The blue light will turn off. To make your high beam headlights flash ON and OFF, pull the lever toward you and release it. To signal turns, move it upward for a right turn, down for a left turn. When you've completed the turn, the signal cancels automatically. To signal a lane change, push this lever lightly up or down, not as far as for a complete turn. With the Autolight system, you can preset the headlights to automatically operate based on exterior lighting conditions. To activate this system, simply turn the headlight switch to the AUTO position then turn ON the ignition. To turn the system OFF, turn the headlight switch to any other setting. If the ignition is pushed to the OFF position and one of the doors is opened, the headlights will remain on for a period of time. There is a light sensor that controls the Autolight system on the top of the instrument panel. Keep that area clear of papers and other material.
More from this channel
-
0:35
2015 NISSAN Juke - Shoulder Belt Height Adjustment
-
1:43
2015 NISSAN Murano - Connecting Procedure without Navigation (if so equipped)
-
0:18
2012 NISSAN Rogue - Tilt Steering Column
-
0:45
2015 NISSAN Murano - Parking Brake and Indicator
-
1:04
2015 Nissan Quest - USB/iPod® Interface
-
0:36
2015 Nissan Quest - Instrument Brightness Control
-
0:40
2015 NISSAN Murano - Turn Signals
-
1:33
2015 Nissan Quest - Push Button Ignition