Losi TEN-SCTE Exploded Ball Bearing - Rear Differential, Pinion & Ring Gear

620 views · Published 8 July 2016 · 0:57 · Indexed 27 October 2026

Channel: Paul79UF · 2016 · Autos & Vehicles

Watch on YouTube

Check out my Losi TEN-SCTE Review - 
http://www.paulstravelpictures.com/blog/?p=4589

I took my Losi TEN-SCTE to Florida to run it with some friends' trucks in the street. The cheap $9.99 / pair tires I got from Hobby Soul (China) on eBay worked great for the pavement. 

I think the high speed runs on asphalt and the many full throttle donuts caused the inner ball bearing on the pinion gear to explode.

This allowed the pinion gear shaft to wiggle around and not mesh with the ring gear during braking or turning. It would make a loud clicking or grinding noise when I hit the brakes or even drifted around a turn.

The pinion gear spinning with no bearing in place scraped and rubbed away lots of plastic on the front half of the rear differential case. 

So I replaced the differential case and I'm waiting to receive some new "Revolution" bearings from Avid RC.

I also ordered a set of 5mm and 6mm shims to shim the pinion gear a bit closer to the ring gear on the rear diff since it seems a bit worn from the damaged ball bearing allowing the pinion gear to move around.

More from this channel