How to Make a Bird | Origami
4,265 views · Published 3 July 2013 · 7:59 · Indexed 1 November 2026
Channel: Howcast · 2013 · Howto & Style
Full Playlist: https://www.youtube.com/playlist?list=PLLALQuK1NDrj_7PjeVpq567LwW5IBeHnG - - Like these Kid's Activities !!! Check out the official app http://apple.co/1ThDIrx Watch more How to Make Origami videos: http://www.howcast.com/videos/510947-How-to-Make-a-Bird-Origami So these are the instructions for making an origami flapping crane. For the origami flapping crane, we're going to start with a sheet of paper with the color side up. We're going to begin with a diagonal fold. So the diagonal fold, we're going to take the bottom corner. We're going to fold it all the way up to the top, and make sure that it lines up so that the points are right on each other instead of having one a little bit off to the side either way. Just make sure it's nice and exact, and hold it down with one finger, and then slide down to the bottom so that it's nice and flat. Hold it in place with your thumb, and then slide out to one corner, and then slide out to the other corner. And that should give you nice, sharp corners for a diagonal fold. Open it up, and then we're going to do one more diagonal fold in the opposite direction, like that. Next, flip the paper over. We're going to take the bottom edge, and we're going to fold it up to the top edge. This is called a book fold. So with this book fold, again, we want to be as precise as we can before we make a nice crease. Open it back up, and then we're going to do the other book fold as well. And after we get that last book fold, go ahead and pick up the model. Leave that book fold there. We're going to pinch right on the top point next to these diagonal lines right here. We're going to hold it, pinch it right there, and then we're going to rotate the model up so that all four corners touch each other at the same spot. And once that happens, go ahead and flatten the model down. This is called a square base, or a preliminary base, in origami. We haven't made any new folds on that at all. We've just reorganized the ones we've already made. So go ahead and flatten that down, and find the spot that's got the extra flaps, like this. There's one spot that's going to be locked in, and that's the top of the model. We want to look at where the bottom is with the open flaps and have that towards you. Then we're going to make two kite folds. We're going to take this edge right here and this edge right here, and we're going to fold both of those into the middle of the paper, right up against that middle line, on the left side, also the right side. It should terminate right down to a nice point right here at the bottom. Right there. And fold the top point all the way down over the top of them, just like that. We're going to rotate. We're going to turn the entire model over. And now we're going to fold these two kite folds into the middle here, as well. So again, both of these going into the middle line but not overlapping like that. Now, all those folds that we just made, those are preliminary folds so that we can do what's called a petal fold. So unfold these two flaps, and what we're doing is we're going to try and isolate this one flap of paper, just the one sheet right here, and I'm going to use my other finger to sort of lock the other two down on the table, on the flat surface. And we're going to pick up this flap all the way up to the top. And as you watch when I do that, these two outside edges naturally want to move in, which is good, because we've already made this crease right here, so we have a crease for them to just fall naturally into. And when this happens, we can flatten the whole model while stretching this top flap all the way up so it lies flat on the table. This is again called a petal fold, and it starts down here like this, and we pick the whole thing up and then flatten the model down. And we're going to do this petal fold also on the back, so flip it over. Pick up that triangle. Open up these two flaps, and fold the flap back down. And then pick up just one sheet of paper, and pick it all the way up to the top, again, stretching it all the way up until the other two sides want to come in and flatten down. And this is called the bird base that we've got right here. It's got these two open spots. This is going to be our head and our tail for the crane. So this right here is the bird base. What we're going to do is, now I'm going to fold one flap from the right hand side all the way over to the left hand side. Just like that. You'll see now this triangle shows up here in the middle. After we do that, we flip the whole thing over and then do it one more time. So we take one flap from the right. We fold it all the way over to the left, and that's going to give us these two flaps here at the top, and then two flaps on either side on the bottom. Next step, I'm going to pinch right here on the model, so that I can isolate this flap. And see how I ca
More from this channel
-
2:23
How to Register to Donate Bone Marrow
-
3:28
How Are We Connected in the Americas?
-
2:01
How to Take in a Boarder
-
2:08
How to Beat Recession Depression
-
1:42
How to Cancel a Catalog
-
2:52
How to Get the Gifts You Want at Your Wedding
-
2:39
How to Mentor a Military Veteran and Their Family
-
1:20
How to Know If Your Generic Medicines Are Safe