2014 NISSAN Titan - Power Moonroof (if so equipped)

420 views · Published 18 April 2015 · 1:23 · Indexed 30 October 2026

Channel: Nissan Owner Channel · 2015 · Autos & Vehicles

Watch on YouTube

With these two switches, the power moonroof can either tilt up and down or slide open and closed. The ignition must be in the ON position to operate it.

To fully open the moonroof, push this switch toward the OPEN position. To fully close it, push the switch toward CLOSE. To partially open or close the moonroof, push the switch in either direction while it is moving, to stop in the desired position.

To tilt the moonroof up, push this switch toward the UP position. To tilt it down, push the switch toward the DOWN position.

Open and close the sunshade by sliding it forward or backward.

When the ignition is turned OFF, power to the moonroof continues for a period of time. If either front door is opened during this period of time, power to the moonroof is cancelled.

If the moonroof does not operate properly, perform the following procedure to initialize the moonroof:
1. If the moonroof lid is open, push the tilting switch repeatedly toward the down position to fully close the lid.
2. Push and hold the tilting switch for more than 2 seconds toward the down position.
3. Initialization is complete. Check to see if the moonroof operates properly.

If the moonroof still does not operate properly, please see your Nissan dealer for service.

More from this channel