2014 Nissan Cube - Seat Adjustments
2,295 views · Published 19 April 2015 · 3:21 · Indexed 4 November 2026
Channel: Nissan Owner Channel · 2015 · Autos & Vehicles
"To adjust the front seats, reach down and find this lever under the seat. Pull up while you slide the seat forward or backward to a desired position. Release the lever to lock the seat in that position. To recline the front passenger seatbacks, locate this lever on the side of the seat base. Pull up and lean back. To bring the seatback upright, pull the lever and lean forward. Release the lever to lock the seat in position. Your driver's seat is equipped with a seat lifter. Your seat height can be adjusted using this lever, located on the outside of the seat base. Pull up or push down repeatedly on the lever to adjust the height of the seat cushion until the desired position is achieved. The second-row bench seats can also be adjusted for comfort. Find this lever under the seat. Pull up on it, while sliding the seat forward or backward. Release the lever to lock the seat in position. To recline the second-row seatback, locate either of these straps on the seat cushions. Pull the strap and lean back. To bring the seatback upright, pull the strap and lean forward. Release the strap to lock the seatback in position. The second-row seats can be folded to create extra storage space when needed. Before folding down the second-row seatbacks, you will need to store the second-row seat belts. Secure the outboard seat belts in these seat belt hooks on either side of the bench seat. Then disconnect the center seat belt by inserting a key or other suitable tool into the slot on the side of the connector buckle. Hold onto the connector tongue when releasing it from the connector buckle so it does not retract suddenly. Now secure the seat belt tongue and the connector tongue on the seat belt hook. Make sure to tuck the seat belt buckles into the seat pockets before folding the seatback. Before folding the second-row seatbacks down, make sure that the seat path is clear, as the seatbacks are spring assisted and may move at a rapid rate. Be careful not to allow the seatback to pinch or hit any part of your body. To fold the second-row seatbacks down from inside the passenger cabin, pull the same straps used to recline the rear seatbacks and fold the seatbacks flat over the seat cushions. To fold the second-row seatbacks flat while loading an item in the cargo area, pull on these straps on the back of the seatbacks to fold them forward over the seat cushion. To return the second-row seats to a seating position, push the seatbacks up into the vertical position until they lock in place. When you return the rear seats to the vertical position, be sure to properly reset the seat belts, pull the seat belt buckles completely out of the pockets in the seat cushion, ensure the seat is locked into position and reconnect the center seat belt connector plate to the connector buckle. "
More from this channel
-
0:35
2015 NISSAN Juke - Shoulder Belt Height Adjustment
-
1:43
2015 NISSAN Murano - Connecting Procedure without Navigation (if so equipped)
-
0:18
2012 NISSAN Rogue - Tilt Steering Column
-
0:45
2015 NISSAN Murano - Parking Brake and Indicator
-
1:04
2015 Nissan Quest - USB/iPod® Interface
-
0:36
2015 Nissan Quest - Instrument Brightness Control
-
0:40
2015 NISSAN Murano - Turn Signals
-
1:33
2015 Nissan Quest - Push Button Ignition