2013 NISSAN Sentra - Climate Controls

4,969 views · Published 19 April 2015 · 3:08 · Indexed 14 November 2026

Channel: Nissan Owner Channel · 2015 · Autos & Vehicles

Watch on YouTube

This is the automatic heater and air conditioner control panel. If your vehicle is not equipped with this feature please see your owner's manual for instructions on how to operate your climate control system.

The automatic heater and air conditioner offers dual climate control panel for adjusting air flow, fan speed, temperature, air conditioning, defrosting or defogging and air intake.

This FAN SPEED CONTROL switch regulates fan speed at various settings. Push the MINUS sign for lower fan speed. Push the PLUS sign for higher fan speed. To turn the system OFF, press the ON/OFF button.

Press the A/C button to turn the air conditioning ON or OFF. An indicator light will illuminate when the AC is ON.

These are the DUAL TEMPERATURE CONTROLS. Push the red arrow to raise the temperate or the blue arrow to lower it. The temperature control switch on the left controls the temperature on the driver's and passenger's side unless the DUAL button is pressed. Press the DUAL button to separate the temperature controls.

This is the MODE button, which allows you to select airflow outlets. Refer to the pictograms for the various airflow combinations:

For quick cooling when temperature is high, press this button.Note: in hot or humid conditions, a visible mist may be seen coming from the vents. This does not indicate a malfunction.

Press this AIR RECIRCULATION button, and its indicator will illuminate. This helps AC efficiency and helps block outside odors from entering the cabin. The air conditioner will automatically activate when this feature is operating. The air recirculation feature cannot be activated when any of the defrost outlets are selected. Press the fresh air intake button, to turn OFF and allow fresh air from outside to be drawn into your vehicle. Allowing outside air to enter the vehicle further improves defogging performance.

To Defrost or Defog front and side windows, press this button. Next, set the desired temperature by pressing the red or blue arrows on the left side of the unit. To set the defroster on high, push the PLUS sign on the FAN SPEED switch until all 7 bars appear on the indicator. For windshield deicing, your temperature selector should be turned to maximum heat.

The AC will automatically activate when either of the front windshield defroster modes is selected. This helps clear the windshield faster. In order to turn the AC OFF, Press the MODE button for a setting that does not include a defrost mode, then press the AC button.

To Defrost or Defog the rear window push the REAR WINDOW DEFROSTER switch. The indicator light will illuminate. After defrosting, push to turn OFF. If not turned off manually, this feature will turn itself off in 15 minutes.

More from this channel