Vignette Accuracy - Question and Answer - Architect Registration Exam | ARE Live
357 views · Published 27 May 2016 · 7:04 · Indexed 4 November 2026
Channel: Black Spectacles · 2016 · Education
15% Discount on a Black Spectacles Membership for AIA Members: Visit: http://blackspectacles.com/membership and enter code: 42716QNATW AIA ARE Prep powered by Black Spectacles- blackspectacles.com/courses Mike's Recommended Resources to pass the ARE: http://blackspectacles.com/blog/books-need-to-pass-are-exam-resources Mike: Okay, we're going to take a quick look at this. All right. This is a question about the current 4.0 vignettes. This is kind of an issue one. This one comes up a lot. And so there's a couple things to say about this, so real quick. NCARB response on having trouble getting the lines to land where she wanted them to land on the PPP vignette, "Everything snaps to an invisible grid. Behind the scenes you would appreciate why this is so." This was the response from NCARB. And then the response to that is like, "What does that mean? How do I get it to go where I want it to go?" So there's a couple of things to say about this. One of them is that there is a little bit of slippage that's allowed in the vignette. If you are trying really hard to get one thing to line up with another thing and you just can't get it to happen, even if you zoom in and you just can't, for whatever...it's snapping to the wrong thing or something. You just can't get it to line up, presumably that means that you're actually closer in than is necessary and it's not expecting you to be that exact. Of course it could also be that your computer is messed up at the testing center or some other thing. But the way they would answer it is there's a little bit of slippage and they are not expecting you to be exact right on the money all the time. It's an awkward program, they know that. They've set it up in that way, not that it makes it harder, but they've set it up where there's a range of acceptable reasonableness. Obviously if you're in one of the vignettes where things are tighter and closer in and smaller in scale, like the stair vignette or something like that, that the snapping range is going to be closer or tighter. Whereas if you're in the site planning, you have a little bit more room in terms of how many inches you can be off. So, in general, if you're really battling the program, my suggestion is just don't battle it. Get as close as you can and move on because that probably is beyond what they are expecting. It's actually an extreme moment to talk about some of the stuff that's coming. This is also going to be true with the new drawing versions that are going to be coming in place of the vignettes. The vignettes are going to be totally gone, and in their place will be things like, okay, here's a wall section, and over to the right is some flashing, and you have to put the flashing into the wall section. So you're going to physically move the flashing into the wall section and you're going to get it pretty close, but obviously everybody is going to put it in slightly different locations and it should understand that. It should understand that there's a little bit of wiggle room. NCARB actually used the word "wiggle room" when they were talking to us about it. Now, each different situation will be slightly different amounts of wiggle. And, of course, for reasons that you can imagine, they won't tell us what the wiggle amount is. The point is they're not trying to trip you up with the program. They're trying to see if you understand the answer. Now, that's easy to say. It doesn't mean it always feels that way when you're in the middle of it, and we get that, but the best we can say about it is if you're fighting that hard to get it exactly right, you're probably tighter in than you need to be. Marc: And there's actually to probably make there, which is...I mean, after talking to the folks at NCARB, they get this, and they're trying to be reasonable about this. So you're not going to fail an exam because you're off by a quarter of an inch or something or you're off by a little bit. They're looking for a really obvious.... Mike: Like a site plan, you're off by six inches or something like that. That's a small number compared to a site plan. Marc: Yeah. So, I mean, I think as you say, it's probably not a massive concern and something you should spend a lot of time focusing on, I suppose. Mike: We totally get that that's really easy for us to say because there you are. When is it a massive concern? Because they give you, "You didn't pass this." It's hard to know exactly, but the general rule is, if you've zoomed in, and you think you know where you're meant to put it, and you get reasonably close, that's probably close enough. Marc: All right. Maybe we'll close it up there. We'll go ahead and, yeah, thank everybody for tuning in. This was a really...it was a really great collection of questions that you guys sent. So thank you so much.
More from this channel
-
4:13
3Axis Digital Fabrication | Kansas City | Black Spectacles
-
2:08
Speculations on Design Technology with Erin Rae Hoffer & Scott Simpson | Black Spectacles
-
3:22
David Fano and Steve Sanderson of Design By Many | Black Spectacles Interview
-
1:50
The Un-Competition Project | Black Spectacles
-
0:35
Revit Tutorial: Introduction to Curtain Wall Families in Revit Architecture | Black Spectacles
-
2:53
Revit Tutorial: Types of Curtain Walls | Black Spectacles
-
9:55
Revit Tutorial: Building a Stick Curtain Wall | Black Spectacles
-
0:36
Revit Tutorial: Introduction to Door Families in Revit Architecture | Black Spectacles