Look Who it Was Random video

FPV Quadcopter Build Part 2 - RCLifeOn

3,850 views · Published 12 March 2016 · 8:28 · Indexed 25 September 2026

Channel: RCLifeOn · 2016 · Science & Technology

Watch on YouTube

In part 2 of my complete guide on how to build an inexpensive FPV racing quadcopter I will show you how to
install the FPV system, solder the main power cables and bind the receiver to the transmitter.

Remember to have a well ventilated room while soldering! I use a fan to blow the smoke out of my face.

Parts:

FPV: http://rctimer.com/product-1276.html

Antennas: http://rctimer.com/product-1090.html

Heat Shrink Tubing (big): http://www.hobbyking.com/hobbyking/store/__76037__Turnigy_50mm_Heat_Shrink_Tube_1m_Clear_.html

Mounting Pads: http://rctimer.com/product-913.html

LED-strip: http://www.hobbyking.com/hobbyking/store/__8944__Turnigy_High_Density_R_C_LED_Flexible_Strip_White_1mtr_.html

22AWG Wire: http://www.hobbyking.com/hobbyking/store/__6904__Flat_22AWG_servo_wire_1mtr_R_B_Y_.html

16AWG Wire: http://www.hobbyking.com/hobbyking/store/__47091__Turnigy_Pure_Silicone_Wire_16AWG_1m_Black_EU_Warehouse_.html

Helping Hands: http://www.hobbyking.com/hobbyking/store/__10615__Hands_Free_Small_Item_Holder.html

XT60 Connector: http://www.hobbyking.com/hobbyking/store/__9572__Nylon_XT60_Connectors_Male_Female_5_pairs_GENUINE.html

Cable Ties: http://rctimer.com/gallery-141.html

1.5mm Hex Screwdriver: http://www.hobbyking.com/hobbyking/store/__11062__Turnigy_1_5mm_Hex_Screwdriver.html

Transmitter and Receiver: http://www.hobbyking.com/hobbyking/store/__62710__Turnigy_TGY_i6_AFHDS_Transmitter_and_6CH_Receiver_Mode_2_.html

Turnigy Nano Tech 1300mah 3S 25-50C: http://www.hobbyking.com/hobbyking/store/__11903__Turnigy_nano_tech_1300mah_3S_25_50C_Lipo_Pack.html

Hope you like the video and don't forget to subscribe: http://www.youtube.com/user/rclifeonsimon?sub_confirmation=1

Music: TheFatRat - Monody (ft. Laura Brehm)

Used camera/s:
Sony Alpha a55 

Video Editing Programs:
Lightworks

More from this channel