Throwbar magnet on Train-Li switch

497 views · Published 17 December 2013 · 13:41 · Indexed 19 October 2026

Channel: gregeusa · 2013 · Entertainment

Watch on YouTube

Video by Ted Doskaris.  TheTrain-Li R7 turnout powered frog is controlled by a Reed relay that is caused to switch by a magnet nestled in the throwbar lever.  The throwbar magnet can be profoundly affected by other magnetic devices, such as the Kadee uncoupling magnet that has a notably strong magnetic field - so much so that if placed too close to the R7 turnout's magnet, it will permanently alter (weaken) its field strength so it will no longer work to switch the adjacent Reed relay.  When the throwbar magnet is too weak (just like removing it), frog powering defaults to the diverging path.  (When this happens, a loco that comes in contact with the frog whilst traversing the straight path will induce a track power short circuit.)  This is of concern since it's likely layout turnouts will have Kadee uncoupling magnets near them, particularly in rail yard applications.  I discovered it's best to keep the Kadee uncoupling magnet at a safe distance (no closer than 3 inches) from the turnout's throwbar magnet to avoid influencing the switching action of the Reed relay.  Testing, also, revealed when the Kadee uncoupling magnet is in too close proximity of the throwbar magnet, the throwbar magnet will need to be replaced.  Another video describes the ill affects of a magnetized deck screw that had been located directly under the R7 turnout's throwbar magnet, thereby, preventing the Reed relay from switching when the throwbar was actuated.

More from this channel