Look Who it Was Random video

Assembling of Computer Motherboard, Installation of SATA Harddisk and DDR2 RAM (Hindi)

3,229 views · Published 16 September 2017 · 20:11 · Indexed 26 October 2026

Channel: Sukhdev Taneja · 2017 · Howto & Style

Watch on YouTube

Watch out easy steps of assembling of computer motherboard (Gigabyte H61M-D2H) carried out at National Computers (35-36, Lajpat Rai Market, Hisar).

Specifications of Gigabyte GA-H61M-D2H Motherboard

Chipset : Intel H61
Form Factor : Micro-ATX
Socket Type : LGA 1155
Compatible Processors : Intel Core i3 Processor, Intel Core i5 Processor, Intel Core i7 Processor, Intel Pentium Processor, Intel Celeron Processor
Dimensions : 244 x 225 mm

Memory :

Memory Configuration : 16 GB DDR3 Dual Channel DIMM
Memory Frequency : 800 MHz, 1066 MHz, 1333 MHz
Number of Memory Slots : 4 Slots

Other Features :

Storage : 3 Gb/s SATA
Ethernet Controller : Atheros 8151
Ethernet Features : 10/100/1000 Megabit
Audio Codec : Realtek ALC889
Audio Channels : 7.1

Installation of SATA Harddisk 

Watch out easy steps for installing SATA Harddisk and DVD ROM in Pentium 4 Motherboard by Sukhdev Taneja (Computer Specialist).

Easy Steps for Installing DDR2 RAM

Watch out easy steps to install DDR1 RAM in Pentium 4 based motherboard by Sukhdev Taneja (Computer Specialist). 

RAM is sensitive to static charges and should be handled carefully. Never touch the metal conductors and only handle RAM by their edges. 

Depending on its architecture, there will always be at least one notch in a RAM, but never more than two.

RAM modules are keyed with little notches that fit over corresponding tabs in the RAM slots. Before inserting the RAM module, make sure that the notches and tabs are correctly lined up.

Installing RAM is easy to do and probably the easiest task in building a computer.

There will be one or two indentations on your RAM (depending on type of RAM). These indentations need to face the notches on the RAM slots. Now take the RAM carefully and push them into RAM slot, the little RAM clicks should snap into place.

If the BIOS screen comes up on your monitor and there is not a series of beepings then your RAM is successfully installed. To check if all your RAM is recognized by your computer, then you need to go to the BIOS setup, which will display the amount of RAM that is recognized.

More from this channel