Leigh Super FMT Mortice & Tenon Jig
2,706 views · Published 29 May 2014 · 1:55 · Indexed 27 October 2026
Channel: Axminster Tools · 2014 · Howto & Style
After the success of the range of Leigh Super Jigs for cutting dovetails, it became apparent that a lower cost alternative to the FMT would also be a very welcome addition to the superb range of Leigh jigs. Well here it is, the Super FMT which can produce exactly the same joints as the original version but at a fraction of the cost. It is supported by all the same guides and accessories that are available for the FMT and it has the same capability and capacity. The cost has been kept low by using steel instead of aluminium in the manufacture of this model and F clamps have replaced the cam action clamps used on the flagship model. The accuracy and quality have not been compromised on this very affordable jig and you will be impressed by the excellent range of joints it is capable of producing. A worthwhile addition to the Super FMT is the optional vacuum box (211377) which when used with a suitable extractor, helps to keep airborne dust to a minimum in the workshop. N.B. The Super FMT is available in metric versions only. Standard Equipment • Universal sub-base that attaches to virtually any plunge router • Six standard joint guides 8mm x 15mm , 20mm , 25mm , 30mm , 35mm , 40mm • Joint guide stand • Leigh 170-500 5/16" HSS spiral upcut bit 1/2" shank Simplicity is the Key The Leigh FMT and Super FMT use just one bit, one guide and one set-up for every standard joint. It's that easy. There are no bit or guide changes to fuss with and the set-up stays the same for both parts of the joint. Joint fit is easily adjusted for perfect results every time. FMT guides and bits allow you to create any size mortice and tenon from a tiny 1/16" x 1/8" to a massive 1/2" x 5". http://www.axminster.co.uk/leigh-super-fmt-mortice-tenon-jig-23653