2016 Nissan NV Cargo Van - Seat Adjustments

1,082 views · Published 28 September 2015 · 2:51 · Indexed 26 October 2026

Channel: Nissan Owner Channel · 2015 · Autos & Vehicles

Watch on YouTube

"For information please visit https://owners.nissanusa.com/nowners/.  You will find quick reference guides and other useful information about your warranty, Bluetooth® system, and much more!

If your new vehicle is equipped with a power adjustable driver’s seat, here’s how to operate it. To make the seat slide forward or backward, look for this switch on the side of the seat. Slide it forward or backward and the seat will move in that direction.

To make the seat recline, move this recline switch backward until you achieve the desired position. To bring it back upright, move the switch forward and lean forward. The seatback will return to a more upright position.

If so equipped, the switch you use to move the seat forward and back can also be used as a seat lifter, adjusting the angle and height of the seat cushion. Push the front or rear end of the switch up or down to adjust the cushion.

The lumbar support feature, if so equipped, provides lower back support to the driver. If your driver’s seat is equipped with lumbar support, turn the dial to adjust the seat’s lumbar area.

If your vehicle is equipped with manual front seat adjustments, reach down and find this lever under the front seat. Pull up on it while you slide the seat forward or backward to a desired position. Release the lever to lock the seat in that position.

To recline the front passenger’s seatback manually, locate this lever on the side of the seat base. Pull up and lean back. To bring the seatback upright again, pull the lever and lean forward.

If your seats are equipped with armrests, pull them down for added comfort and push them back up into the stowed position when not needed.

For extra storage length, the front passenger’s seat can be folded flat. First, slide the seat to its rear-most position and lift up on the recline lever located on the outside of the seat. This releases the back of the seat, so you can fold the seatback flat over the seat cushion.

Then fold the seatback forward as far as it will go.

When you fold down the front passenger seat, you'll not only have extra cargo space, but a tabletop ""workstation"" designed right into the seatback. Make sure all cargo is properly secured and not near an air bag.
 

When its need for storage is finished, lift up on the seatback and push it upright. Then pull up on the recline lever and lean the seatback to the desired position.
Release the recline lever and the seatback will lock in place.

When returning the seatback to the upright position, always be certain it is completely secured in the latched position.

Please see your Owner’s Manual for important safety information, system limitations and additional operating information.
"

More from this channel